Home-Products- Conveyor Machine - Screw Conveyor-

Content

video

Auger Conveyor

Alias: Screw Conveyor
Conveying method: horizontal, inclined, vertical
Type: single axis, dual axis, multi axis, no axis
Material: carbon steel, stainless steel, other custom steel
Conveying material: powder, granuleWorking principle of Auger conveyor

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Working principle of Auger conveyor

 

The working principle of the auger conveyor is that the rotating screw blade pushes the material for conveying by the screw conveyor, and the force that prevents the material from rotating with the screw conveyor blade is the weight of the material itself and the frictional resistance of the screw conveyor casing to the material. The spiral blade welded on the rotating shaft of the screw conveyor, the surface type of the blade has solid surface type, belt type surface type, blade surface type and other types according to the different conveying materials. The screw shaft of the screw conveyor has a thrust bearing at the end of the material moving direction to give the screw axial reaction force with the material. When the length of the machine is long, an intermediate hanging bearing should be added.

 

product-840-400

 

Features

 

  • Simple structure, small cross-sectional size, good sealing, reliable operation and low manufacturing cost,
  • It is convenient for intermediate loading and unloading, and the conveying direction can be reversed, and it can also be conveyed in opposite directions at the same time.
  • The materials can also be stirred, mixed, heated and cooled during the conveying process.
  • The material flow can be adjusted through the loading and unloading gate.
  • It is not suitable to convey materials that are perishable, viscous, easy to agglomerate and bulky.
  • During the conveying process, the material is easily broken, and the screw and the trough are easily worn.

 

Technical Parameters

 

LS type

100

160

200

250

315

400

500

630

800

1000

1250

GX type

 

 

200

250

300

400

500

 

 

 

 

Diameter(mm)

100

160

200

250

315

400

500

630

800

1000

1250

pitch(mm)

100

160

200

250

315

355

400

450

500

560

630

speed(r/min)

140

120

90

90

75

75

60

60

45

35

30

Capacity QΦ=0.33(m³/h)

2.2

7.6

11

22

36.4

66.1

93.1

160

223

304

458

Power Pd 1=10m(KW)

1.1

1.5

2.2

2.4

3.2

5.1

4.1

8.6

12

16

24.4

Power Pd 1=30m(KW)

1.6

2.8

3.2

5.3

8.4

11

15.3

25.9

36

48

73.3

speed(r/min)

120

90

75

75

60

60

45

45

35

30

20

Capacity QΦ=0.33(m³/h)

1.9

5.7

18

18

29.1

52.9

69.8

125

174

261

305

Power Pd 1=10m(KW)

1.0

1.3

2.1

2.1

2.9

4.1

4.7

6.8

9.4

14.1

16.5

Power Pd 1=30m(KW)

1.5

2.3

4.5

4.5

7

8.9

11.6

20.4

28.3

42.2

49.5

speed(r/min)

90

75

60

60

45

45

35

35

30

20

16

Capacity QΦ=0.33(m³/h)

1.4

4.8

15

15

21.8

39.6

54.3

97

149

174

244

Power Pd 1=10m(KW)

0.9

1.2

1.9

1.9

2.5

3.4

4.3

5.4

8.1

9.5

13.3

Power Pd 1=30m(KW)

1.2

2.2

3.8

3.8

5.4

6.8

9.2

16

24.4

28.6

39.9

speed(r/min)

75

60

45

45

35

35

30

30

20

16

13

Capacity QΦ=0.33(m³/h)

1.2

3.8

11

11

17

31.7

46.5

73.0

99.3

139

199

Power Pd 1=10m(KW)

0.75

1.1

1.6

1.6

2.1

3.1

3.7

4.6

5.7

7.7

11

Power Pd 1=30m(KW)

1.1

1.8

3.4

3.4

4.4

5.6

8

14

16.7

23.2

33

 

1. GX type: There are seven specifications of screw diameters including 150, 200, 250, 300, 400, 500, 600mm. Corresponding conveying system for one-way conveying with horizontal or inclination angle less than 20°.

2. LS type: LS type Luo Xuoh press conveyor is a replacement product of GX type Auger conveyor. The screw diameter is 100-1250mm, there are eleven specifications, and the driving mode has two forms of single-end drive and double-end drive. ; The length of the LS type screw feeder is every 0.5m, and the corresponding conveying system can be formed according to different site needs. Like the GX type Auger conveyor, it is used for one-way conveying with a horizontal or inclination angle less than 20°.

 

The Structure

 

product-600-372

 

Structural composition

 

Auger conveyor is mainly composed of driving device, head assembly, casing, shaftless spiral body, tank lining plate, feeding port, discharging port, machine cover (when necessary), base and so on.
1. Driving device: Cycloidal pinwheel reducer or shaft-mounted hard-tooth surface gear reducer is used. In the design, the driving device should be set at the end of the discharge port as much as possible, so that the screw body is in a tension state during operation.
2. The head is equipped with a thrust bearing, which can bear the axial force generated when conveying materials.
3. Chassis: The chassis is U-shaped or O-shaped, with a rain-proof cover on the upper part, and the material is stainless steel or carbon steel or glass fiber reinforced plastic.
4. Shaftless spiral body: the material is stainless steel or carbon steel.
5. Tank lining board: the material is wear-resistant plastic plate or rubber plate or cast stone plate, etc.
6. Inlet and outlet: There are two kinds of square and round. Generally, the form of inlet and outlet is determined by the user.

 

Which industries or materials are Auger conveyor suitable for?

 

Horizontal Auger conveyors can be used for powder, granular and small block materials in various industries for conveying, metering, cooling, mixing, separation, compaction and loading. According to your requirements, horizontal Auger conveyors can achieve dust-proof, gas-free Tight or watertight, thus protecting not only your product from external influences, but also the environment.

 

Materials that Auger conveyors are not suitable for conveying:

 

Such as: Coal mine, ash, slag, cement, grain, recycled rubber powder, zinc oxide, calcium carbonate, etc., the material temperature is less than 200 ℃. The screw machine is not suitable for conveying materials that are perishable, viscous, and easy to agglomerate.

 

1

 

 

Different feeding methods

 

product-711-464

 

Several common conveying methods

 

According to the working conditions on site, the conveying methods of the Auger conveyor are as follows. In special cases, please contact our sales staff to make the most suitable solution.When choosing a deep Auger conveyor, please note the following:

 

product-700-459

 

details display

 

product-840-686

 

Various types

 

product-750-717

 

Introduction to the correct operation

 

1. When the screw shaft rotates, due to the gravity of the material and the frictional force generated by the tank wall, the material can only move forward along the groove bottom of the conveyor under the push of the blade, and it seems that it cannot rotate. The nut moves in translation along the rotating screw.

2. The movement of materials in the intermediate bearing depends on the thrust of the materials advancing behind them. Therefore, the transportation of materials in the conveyor is all a sliding movement.

3. In order to make the screw shaft in a more favorable tension state, the drive device and the discharge port are generally placed at the same end of the conveyor, and the feed port is placed as close as possible to the tail of the other end.

4. The rotating screw blade pushes the material for conveying, so that the force that the material does not rotate with the Auger conveyor blade is the weight of the material itself and the frictional resistance of the Auger conveyor casing to the material.

5. The surface type of the blade includes solid surface type, belt type surface type, blade surface type and other types according to the different conveying materials. The screw shaft of the Auger conveyor has a thrust bearing at the end of the material moving direction to give the screw axial reaction force with the material. When the length of the machine is long, an intermediate hanging bearing should be added.

6. The tubular Auger conveyor is mainly used for horizontal and vertical conveying of various powdery, granular and small pieces of loose materials.

7. The material will produce friction on the side wall of the tubular Auger conveyor, so it is very important to choose the size of the reducer and motor to drive the tubular Auger conveyor. As for the feeding method of the tubular Auger conveyor, the material must be fed into Jiaolong from the feeding port at first. Many manufacturers use this method to realize the feeding work.

 

Maintenance

 

1. Regularly check whether the transmission chain of the Auger conveyor is worn or not. If there is any abnormality, please replace it in time.

2. Check whether the link bolts of the chain plates of the Auger conveyor are tightened. If they are loose, they should be tightened in time.

3. Check the tension of the transmission chain of the Auger conveyor. Too loose and too tight will easily lead to bearing wear.

4. Regularly check whether the lubricating oil of the chain conveyor reducer needs to be added.

5. There must be no foreign matter in the Auger conveyor, which may easily cause chain jams, etc., and should be cleaned up in time.

6. Frequent startup, overload startup and full-load startup are prohibited.

 

Precautions for operation

 

1. Before starting the auger conveyor, carefully check whether there is any remaining dust and debris in the machine groove;

2. The feeding must be uniform;

3. A screen should be added to the feed port of the auger conveyor;

4. The machine slot and machine slot cover must be careful;

5. Before shutting down, the materials in the machine should be unloaded as much as possible;

6. When the machine stops in the middle of the operation, the materials in the machine should be unloaded as much as possible, and the materials in the machine cannot be discharged in time;

7. Regularly check the wear of the spiral blades;

8. Each lubricating part of the conveyor should be lubricated in strict accordance with the requirements;

9. When making harsh noises, it should be checked in time;

10. The bearings at both ends of the auger conveyor should be strictly sealed;

11. Pay close attention to monitor the temperature exceeding the allowable temperature.

 

Common faults and treatment methods

 

Fault name

Cause

Approach

Material cannot be transported

Whether there is enough material in the hopper

Even if there is some material in the hopper, it may not be possible to deliver material if there is not a sufficient number of material "heads"

Is there any material stuck in the hopper?

Used to inject air downwards from the outside. As air escapes from under the discs, they vibrate and inflate the material

Check feed limit

Without enough material entering the conveyor, the desired conveying speed may not be achieved

Overcurrent

 

The inner wall of the box adheres to the material, and the resistance increases

clean up

The case or bearing is bent and rubs against each other

adjust straight

 

Our Guarantees And Services

 

Pre-Sale Service:

  • Guide customers to choose the appropriate equipment model.
  • Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
  • We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

  • Strict inspection of products before leaving the factory
  • Ships according to contract

 

After-sale Service:

  • The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
  • If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
  • After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

About Odifei Company

 

image011

 

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, Auger conveyor, slat conveyor, Auger conveyor, large angle Auger conveyor, Auger conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 Auger conveyor (or Auger conveyor), mobile conveyor, Auger conveyor with large inclination angle ribs; Auger conveyor, shaftless Auger conveyor; light, medium and heavy Auger conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;

In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.

Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!

 

Success case

 

1

 

FAQ

 

Q: Are you a factory or a trading company?

A: We are a factory, established in 2007, specializing in the manufacture of spiral vibration vertical elevator, slat feeder, Auger conveyor, slat conveyor, Auger conveyor, large angle Auger conveyor, Auger conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, and so on.

 

Q: How about spare parts?

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

Q: Will you test the machine before delivery?

A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

Q: Can this Auger conveyor be conveyed vertically?

A: We have vertical Auger conveyors and bucket elevators. According to material characteristics and conveying height, we can choose the most suitable conveying or lifting equipment.


Q: Can the Auger conveyor cool the material?

A : Yes, you can choose a water-cooled Auger conveyor.

 

Q: Can the Auger conveyor have multiple inlets or outlets?

A : Yes, when feeding at multiple feed points at the same time, please pay attention to uniform feeding and control the feeding amount.

 

image013

 

Procurement Process

 

image011

 

Purchase Notice

 

1. Please provide material name, specific gravity, particle size, etc

2. Are there other characteristics: such as viscosity, temperature, corrosivity, etc?

3. Conveying length, horizontal conveying or inclined conveying?

4. Conveying capacity / hour

 

If you are interesting in Auger conveyor, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: auger conveyor, China auger conveyor manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY