Home-Products- Conveyor Machine - Screw Conveyor-

Content

video

Double Shaft Screw Conveyor

The double-shaft screw conveyor uses the rotating screw to move the conveyed material along the fixed casing to carry out the conveying work. The head and tail bearings are moved to the outside of the casing. The double-shaft screw conveyor hanging bearing adopts sliding bearing. Dust-proof sealing device, the bearing bush of the double-shaft screw conveyor generally adopts powder metallurgy, the felt bearing pad is used for conveying cement, and the suspension shaft and the screw shaft are connected by a slider.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Double Shaft Screw Conveyor

The double-shaft screw conveyor uses the rotating screw to move the conveyed material along the fixed casing to carry out the conveying work. The head and tail bearings are moved to the outside of the casing. The double-shaft screw conveyor hanging bearing adopts a sliding bearing. Dust-proof sealing device: the bearing bush of the double-shaft screw conveyor generally adopts powder metallurgy, the felt bearing pad is used for conveying cement, and a slider connects the suspension shaft and the screw shaft. Its primary difference from the common single-shaft screw conveyor is the presence of two side-by-side shafts with screw flights within the trough.

Double Shaft Screw Conveyor

The Structure

Double Screw Conveyor

A double-shaft screw conveyor is mainly composed of a driving device, a head assembly, casing, spiral body, tank lining plate, feeding port, discharging port, machine cover (when necessary), base, and so on.

1. The connection between the screw shaft and the hanging bearing, the head and the tail shaft adopts the embedded tongue type. The installation and disassembly do not require axial movement, and the maintenance is convenient. Long mandrel, fewer hanging and fewer failure points.

2. The variable diameter structure is adopted to increase the volume of the hanging bearing to avoid contact between the hanging bearing and the material. The life of the hanging bearing can reach more than two years.

3. Each transmission part adopts the floating connection method, and the hanging bearing is a universal structure, so that the spiral body, the hanging bearing, and the tail form a whole floating body, which can freely rotate and avoid the conveying resistance within a certain range, without jamming or blocking.

4. The head and tail bearing seats are outside the shell, and all bearings adopt a multi-layer sealing box with sealing technology, and the bearing has a long service life.

5. Compared with other conveying equipment, it has the advantages of a small cross-sectional size of the whole machine, good sealing performance, stable and reliable operation, multi-point loading and unloading in the middle, safe operation, and simple maintenance.

Technical Parameters
Model Double Shaft Screw Conveyor
U-shaped double shaft LS-220 LS-250 LS-300 LS-350 LS-400 LS-500
U-shaped double shaftless LS-200 LS-260 LS-300 LS-400 LS-500  
tilt angle 0-60°
Conveying speed Customizable
Special requirements Can be equipped with a variable-speed motor
Application of the Double Shaft Screw Conveyor

The Double Shaft Screw Conveyor design solves the pain points of single-shaft screw conveyors when conveying certain special materials, and is mainly used for:

1. Conveying dewatered sludge and screenings. The dual-shaft design effectively handles these easily tangled, easily clogged, and viscous materials.

2. Conveying kitchen waste, aged waste, and incineration ash.

3. Conveying viscous chemical raw materials, resins, and wet powders, while simultaneously performing preliminary mixing during the conveying process.

4. Conveying wet, soft, and easily agglomerated food raw materials or by-products (such as vegetable scraps and feed mixtures), combining conveying and mixing functions.

5. Conveying wet ash and highly viscous building material raw materials.

Picture of the Double Shaft Screw Conveyor

Double Shaft Screw Conveyor

 

Two Types of the double screw conveyor

Double Screw Conveyor

NO Double shaft Double shaftless
Core structure Solid central shaft + spiral flighting One-piece molded shaftless spiral ribbon.
Anti-tangling performance Poor; fibrous material easily tangles around and jams the central shaft. Exceedingly powerful; there is nowhere to latch onto it.
Optimal Material Form Powder, granules, and small chunks Sticky, wet, fibrous, chunky, mushy
Conveying length Can reach lengths of over 60 meters. Typically ≤20 meters
Conveying angle Capable of horizontal, steep-angle, and vertical conveying. Almost exclusively horizontal or at a very slight angle.
Effective cross-sectional area The central axis takes up part of the space. Fully open design, high throughput, and excellent material-handling capability.
Power consumption Relatively low Relatively high due to sliding friction.

Double Screw Conveyor VS Single Screw Conveyor

A double Shaft screw conveyor is mainly used for feeding powdery materials. It generally works horizontally and is suitable for feeding under the silo. To achieve uniform feeding and adjust the feeding capacity, the double helix and the single helix are at the same speed. Because the helix angle of the double helix blade is higher than that of the single helix blade, the conveying capacity of the double helix blade is larger than that of the single helix blade. In one week, the delivery volume of the double helix has increased to 1.5-2 times that of the single helix.

scew conveyor

F&Q

1. My material is wet, sticky, and prone to tangling; should I choose a shafted or shaftless design?
A: It depends entirely on the material's characteristics.

Double-shafted screw conveyor: Suitable for conveying powders, granules, and small lumps (e.g., cement, grain, dry sand). However, the presence of a central shaft makes it highly susceptible to tangling with fibrous materials, which can cause the system to jam.

Double Shaftless screw conveyor: Specifically designed for materials that are highly sticky, wet, and prone to tangling. Without a central shaft, the conveying cross-section is completely open; there is nothing for rags, plastic ropes, or wet sludge to wrap around. Additionally, the counter-rotating screws tear and clean each other, offering the ultimate solution for continuous, clog-free operation.
If your material causes headaches for standard conveyors, the shaftless twin-screw model is the reliable choice.

2. What is the conveying capacity of your equipment? Can it meet my production requirements?
A: We offer a full range of models with capacities ranging from a few cubic meters to over a hundred cubic meters per hour.
Conveying capacity is determined by screw diameter, pitch, and rotational speed. We perform precise calculations and model selection based on the material's bulk density, moisture content, and the required conveying distance. Whether for continuous sludge handling or high-volume supply for biomass power plants, we ensure the equipment's capacity perfectly matches your production line.

3. Is the equipment durable? What materials are used, and what is its service life?
A: Durability is at the core of our design. We offer material options such as high-wear-resistant steel and stainless steel to suit various abrasive or corrosive environments.

Shafted screw: The flights are made of wear-resistant steel plate with thickened edges, while the central shaft consists of high-strength seamless steel pipe.

Shaftless screw: The screw ribbon is cold-rolled from special wear-resistant manganese steel, offering high hardness and excellent toughness. The inner wall of the trough is lined with replaceable wear-resistant engineering plastic or cast stone liners, protecting the casing and significantly extending service life. Under normal operating conditions, the equipment provides stable, long-term performance.

4. What is the maximum conveying distance for the shaftless screw? Can it convey at an incline?
A: Since shaftless screw conveyors lack intermediate supports, the recommended horizontal conveying length for a single unit is generally under 20 meters to prevent excessive friction between the spiral ribbon and the trough bottom caused by its own weight. However, for long-distance requirements, we can employ a relay configuration-connecting multiple units in series-to achieve reliable long-distance transport.
Regarding inclination, shaftless screws are suitable only for horizontal transport or slight inclines of ≤30°. If you require steep inclines or vertical material lifting, we recommend using a twin-shaft screw conveyor with a central shaft.

5. Is the equipment prone to clogging? Will it jam where the two shafts overlap?
A: It is not prone to clogging; in fact, it features powerful self-cleaning capabilities.
This is the essence of the twin-shaft design. The flights of the two spiral shafts overlap; as they rotate toward each other, they automatically scrape off material adhering to the opposing shaft's flights, preventing buildup. Simultaneously, this motion powerfully tears apart and conveys large chunks of material. The fully open cross-section of the shaftless twin-screw design further eliminates material accumulation at the center, minimizing the risk of clogging.

6. Is routine maintenance difficult? What are the main wear parts?
A: Maintenance is very convenient.

Clearly defined wear parts: These primarily include the spiral flights (or ribbons) that contact the material and the wear-resistant liners inside the trough. We utilize a modular design, so only specific sections need to be disassembled for replacement rather than the entire machine.

External bearings: Critical bearings are located outside the trough, isolated from the material. This prevents bearing damage caused by material intrusion and ensures reliable sealing; routine maintenance requires only periodic lubrication and inspection.
This saves you significant downtime associated with cleaning and maintenance.

7. Can I customize dimensions and the locations of inlet/outlet ports? What is the lead time?
A: Full customization is supported.
As the original manufacturer, we can design the trough length, inlet hopper dimensions, outlet locations, drive configurations (e.g., variable frequency drives, explosion-proof motors), and sealing structures entirely according to your needs-tailored to your site space and upstream/downstream equipment interfaces. Delivery typically takes 30–45 days after the contract is signed, depending on the complexity of the customization and current production capacity. Our technical team will provide end-to-end support to ensure the equipment integrates seamlessly into your production line.

 

 

 

 

 

 

 

Hot Tags: double shaft screw conveyor, China double shaft screw conveyor manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY