Inclined Screw Conveyor

 

The inclined screw conveyor is suitable for the inclined conveying of powder, granules, and small block materials. The inclination angle is generally not more than 90°. It can be directly connected and fixed with its supporting equipment; no foundation is required, and the space can be fully utilized. In addition, the inclined screw conveyor can According to the user's site requirements, a universal wheel is installed at the bottom, which can be moved at will.

1. It is suitable for inclined conveying materials in the range of 90°, and occupies a small area.

2. Good sealing performance, basically no dust pollution, material spillage, etc. will occur during the entire conveying process, which improves the operating environment.

3. The material flow can be controlled by the loading and unloading gate.

Diameter	Power	Speed	Type	Material
100mm	1.5KW	1450/Min 4P	vertical/tilted (optional)	Stainless Steel/Carbon Steel (Optional)
140mm	2.2KW
165mm	2.2KW
220mm	3KW
275mm	4KW

The rotation speed of the inclined screw conveyor is generally 1450r/min. The rotation speed of the inclined screw conveyor can be adjusted by itself. The larger the angle, the greater the required rotation speed.

Note: The rotation speed of the screw conveyor cannot be unlimited. When the rotation speed reaches a certain limit, the material will be thrown outward due to the excessive centrifugal force, which will result in the inability to complete the process. The larger the angle of the screw conveyor, the smaller the conveying capacity of the same speed ratio and type of conveyor.

Inclined Screw Conveyors are widely used in applications requiring compact layouts, sealed conveying, and moderate lifting heights: lifting grains from the ground to the feed inlet of storage silos or processing equipment; tilting cement and fly ash to mixers or storage tanks; conveying plastic granules to high-level dryers or reactors in multi-story plants; tilting dewatered sludge from below filter presses to transport vehicles or silos; and conveying raw materials such as sugar, flour, and grains to high-level mixers or packaging machines.

According to the working conditions on site, the conveying methods of the Inclined screw conveyor are as follows. In special cases, please contact our sales staff to find the most suitable solution. When choosing a deep Inclined screw conveyor, please note the following:

 

 

 

 

 

 

 

 

 

 

Hot Tags: inclined screw conveyor, China inclined screw conveyor manufacturers, suppliers, factory