Brief Introduction to Continuous Waste Plastic Pyrolysis Machine
Xinxiang Jinzhen Machinery has focused on R&D and manufacturing of Pyrolysis Plants for over 18 years. We have developed a Continuous Waste Plastic Pyrolysis Machine. This kind of pyrolysis plant is used to crack the waste plastic into fuel oil and carbon black. It can process continuously for 24 hours without interruption. All Continuous Waste Plastic Pyrolysis Machine devices are controlled by PLC (can be controlled remotely or by a touch screen).

Main Components of Jinzhen Continuous Waste Plastic Pyrolysis Machine
Jinzhen Continuous Waste Plastic Pyrolysis Machine includes a fully automatic variable frequency feeding system, a three-pass continuous cracking system, a variable frequency constant temperature heating system, an oil and gas purification system, a two-stage cylinder condensation system, a waste gas recovery system, a safety system, a finished oil export system, a fully automatic carbon black recovery system, and a PLC intelligent control system.

Working Process of the Continuous Waste Plastic Pyrolysis Machine

Main working process
1. Pretreatment
Make sure your waste plastic's size is about 1- 3 cm, dry them if they are wet, and then the processing time will be shorter.
2. Feeding
Feed the plastic particles into the continuous pyrolysis reactor using the auto-feeding system.
3. Pyrolysis
Finish feeding, and start to heat the pyrolysis reactor using the heating system. When the temperature reaches a certain temperature, it will be pyrolyzed into oil gas.
4. Condensing
The oil gas will flow into the cooling system, be cooled into liquid oil, and it will be collected into the oil tank. Our two-stage cylinder condensation system can improve the oil yield efficiency and maximize the oil yield.
5. Waste gas recovery and treatment
There are some oil gas which can not be cooled into liquid oil; this part of the oil gas will enter the Waste gas recovery system, then reach the furnace for heating the pyrolysis reactor, saving energy and reducing the cost for workers.
6. Discharge
When the pyrolysis process is over, the carbon black can be discharged through a fully automatic carbon black recovery system. Because it can be discharged at a high temperature, we can collect it directly and pack it, which can save cooling time and improve productivity.
Final Products and Their Wide Applications
1. Fuel oil
The main product produced by this Continuous Waste Plastic Pyrolysis Machine is fuel oil, which can be widely used for power plants, cement factories, glass factories, ceramic factories, and boiler systems.
2. Carbon black
Carbon black can be reprocessed into a carbon block through carbon black briquetting for burning.
3. Uncondensable gas
This part of the uncondensable gas can be used directly as a clean heat source for the pyrolysis reactor, drastically reducing operational energy consumption.
Application of the Continuous Waste Plastic Pyrolysis Machine
This equipment has a wide range of applications, with its core value lying in the processing of waste plastics that are difficult to handle via traditional physical recycling methods.
Processing mixed or low-value waste plastics: It is particularly suitable for handling mixed plastics with complex compositions, contaminated plastics (such as consumer product packaging), and low-value waste plastics like flexible packaging, films, and plastic bags.
Industry-specific waste plastics: It can process waste plastics from specialized sources, such as medical waste (e.g., IV tubing, cotton swabs) and marine plastic debris.
Main Features
1: Low labour cost
The Continuous Waste Plastic Pyrolysis Machine. It is uniformly controlled by the PLC system, which can realize automatic feeding and discharging and automatic slag discharge. Only 1-2 workers are required to operate the PLC or computer.
2: Low operating cost
Continuous and uniform automatic feeding, full cracking, and full and effective use of non-condensable gas. Continuous operation does not need to cool the reactor, thus saving fuel.
3: Large processing capacity
The daily processing capacity of a single set of continuous pyrolysis equipment ranges from 5T to 50T
4: High safety index
Important parts of electrical appliances are used for one use, and one for backup, and accessories such as valves and instruments all meet CE international standards. The PLC system is equipped with an alarm reminder device.
Success case
Technical Parameters
| No. | Item | Specifications | ||
|---|---|---|---|---|
| 1 | Model | JZLXLY-20 | JZLXLY-30 | |
| 2 | Daily Capacity | 20T/D | 30T/D | |
| 3 | Total Power | 50 Kw | 65 Kw | |
| 4 | Working Type | Fully Continuous | ||
| 5 | Reactor Design | Multiple Internal Rotating Reactors | ||
| 6 | Cooling Method | Recycled Water Cooling | ||
| 7 | Reactor Material | Q245R/Q345R Boiler Steel | ||
| 8 | Heating Method | Indirect Hot Air Heating | ||
| 9 | Heating Fuel | Fuel Oil / Recovered Non-condensable Gas | ||
| 10 | Suitable Raw Materials | Various Waste Plastics, Tires, Rubber | ||
| 11 | Main Output | Fuel Oil, Carbon Black, Combustible Gas | ||
how much can you earn with continuous waste plastic pyrolysis machine
1. Calculation Basis (20 T/D, Fully Continuous)
| Parameter | Value | Note |
|---|---|---|
| Model | JZLXLY-20 | Fully continuous, 24 h running |
| Daily capacity | 20 t/day | Nameplate, dry feedstock |
| Monthly running days | 30 days | Plant stops once a month for routine maintenance |
| Monthly feedstock input | 600 t | 20 t × 30 days |
| Feedstock cost | USD 0 / t | Collected free of charge (see note in Section 5) |
| Oil yield | 45 % | Mixed PE/PP/PS film and packaging waste |
| Carbon black yield | 30 % | Sold as raw carbon black |
| Pyrolysis oil price | USD 400 – 550 / t | FOB / local ex-works, depends on region and quality |
| Carbon black price | USD 50 / t | Conservative; range USD 30–100 |
| Non-condensable gas | Recycled as fuel | Covers most of the reactor heating demand |
2. Monthly Profit & Loss at Three Oil Price Levels
| Item (per month) | Oil @ USD 400/t | Oil @ USD 475/t | Oil @ USD 550/t |
|---|---|---|---|
| Waste plastic input | 600 t | 600 t | 600 t |
| Pyrolysis oil output (45 %) | 270 t | 270 t | 270 t |
| Carbon black output (30 %) | 180 t | 180 t | 180 t |
| Revenue - oil | 108,000 | 128,250 | 148,500 |
| Revenue - carbon black | 9,000 | 9,000 | 9,000 |
| Total revenue | 117,000 | 137,250 | 157,500 |
| Electricity (50 kW × 24 h × 30 d @ 0.10/kWh) | 3,600 | 3,600 | 3,600 |
| Labor (6 operators × 600) | 3,600 | 3,600 | 3,600 |
| Maintenance & spare parts | 2,000 | 2,000 | 2,000 |
| Water & consumables | 800 | 800 | 800 |
| Start-up fuel | 700 | 700 | 700 |
| Total operating cost | 10,700 | 10,700 | 10,700 |
| Net monthly profit (USD) | 106,300 | 126,550 | 146,800 |
All figures in USD. Feedstock cost assumed zero;
3. Three Scenarios - Because No Plant Runs at 100 % From Day One
The table above is the theoretical case. In practice a new plant needs 3–6 months to reach stable output, and the oil price in your market will not always sit at the top of the range. Here is the same plant under three realistic scenarios.
| Scenario | Assumptions | Net / month | Net / year |
|---|---|---|---|
| A. Theoretical | 600 t/month, oil USD 400/t, free feedstock | 106,300 | 1,275,600 |
| B. Realistic (recommended) | 70 % utilization = 420 t/month, oil USD 400/t | 71,200 | 854,400 |
| C. Conservative | 50 % utilization, oil USD 350/t, USD 30/t collection cost | 32,050 | 384,600 |
4. Payback Period for Three Investment Levels
| Equipment investment (USD) | Scenario A | Scenario B | Scenario C |
|---|---|---|---|
| 350,000 | 3.3 months | 4.9 months | 10.9 months |
| 450,000 | 4.2 months | 6.3 months | 14.0 months |
| 550,000 | 5.2 months | 7.7 months | 17.2 months |
Send us three figures - your local waste plastic price, your achievable pyrolysis oil selling price, and your electricity and labor rates - and our engineers will return a one-page feasibility sheet built on your data, not on a template. We can also quote the 20 T/D and 30 T/D configurations side by side so you can see where the extra capacity stops paying for itself.
request a free feasibility sheet
Frequently Asked Questions
Q: In addition to waste tires and waste plastics, what other materials can the automatic cracking equipment handle?
A: It can also handle all kinds of rubber product waste, oily sludge, domestic waste, medical waste, etc.
Q: Can the pyrolysis oil produced by continuous plastic pyrolysis equipment be directly used in automobiles?
A: No. Pyrolysis oil can be used as fuel oil for heating boilers and cannot be used directly as diesel. The cracked oil can be further refined to obtain diesel and gasoline. This diesel can be used for heavy machinery and agricultural machinery.
Q: What is the safety level of your pyrolysis equipment?
A: The Continuous Waste Plastic Pyrolysis Machine incorporates several advanced safety designs:
1. PLC control: When the pressure or temperature is too high, the safety device will automatically open. An alarm is issued to remind workers to perform corresponding operations to eliminate hidden dangers.
2. The continuous equipment is equipped with double motors, double pumps, etc. When the water pump cannot be used, the standby water pump will automatically start to ensure the safe and stable operation of the equipment.
Xinxiang Jinzhen Machinery always adheres to the principle of "Ingenuity Manufacturing, Customer First". We provide comprehensive pre-sales consultation, customized solutions, and lifelong after-sales technical support. Our products have earned a trusted reputation in numerous countries and regions globally.
We not only supply the high-quality Continuous Waste Plastic Pyrolysis Machine but can also share our rich market experience to help you source raw materials or find sales channels for your end products.
Q: Can waste plastics and waste tires be processed together?
It is strongly discouraged. The two materials have different pyrolysis temperatures, so processing them together would compromise the process and product quality. Furthermore, plastic pyrolysis is prone to causing wax clogging-an issue not associated with tire pyrolysis-and mixing them would complicate this problem while reducing the value of the carbon black recovered from the tires.
Hot Tags: continuous waste plastic pyrolysis machine, China continuous waste plastic pyrolysis machine manufacturers, suppliers, factory











