Brief Introduction to Continuous Waste Tyre Recycling Machine
The continuous waste tire recycling machine is an industrial-scale, continuous production unit that utilizes pyrolysis technology to thermally decompose waste tires in an oxygen-free or low-oxygen environment, converting them into high-value products such as pyrolysis oil, recovered carbon black, steel wire, and combustible gas.

Working principle of Continuous Waste Tyre Recycling Machine
The core technical principle of this equipment is pyrolysis-a process in which high-molecular-weight polymers in waste tires undergo thermochemical decomposition through the precise control of temperature and pressure in an oxygen-free or oxygen-deficient environment.

The complete process flow is as follows:
Raw material pretreatment: Waste tires must first undergo shredding to produce rubber powder or blocks before entering the continuous pyrolysis system. Tires with a diameter of less than 1200 mm can be processed directly, while those exceeding 1200 mm require prior shredding.
Sealed feeding: The pretreated material is automatically fed into the reactor via a fully enclosed screw feeding system.
Oxygen-free pyrolysis: Inside the reactor, the material is heated to a constant temperature of 180–350°C. Under conditions of slight negative pressure (<100 Pa), the long-chain rubber polymers in the tires break down and decompose into an oil-gas mixture.
Product separation and recovery:
The oil-gas mixture enters a cooling system and condenses into pyrolysis oil.
Non-condensable gases are purified and recycled as fuel to provide heat for the system.
Solid residues (carbon black) and steel wire are discharged and recovered separately.
Flue gas purification: Flue gas generated during combustion undergoes multi-stage purification to ensure emissions meet regulatory standards.
The entire system features a closed-loop design based on circular economy principles; it supports 24/7 uninterrupted operation, with a single continuous running cycle lasting between 30 and 120 days.
Application of the Continuous Waste Tyre Recycling Machine
Various types of waste tires: passenger vehicle tires, OTR (off-the-road) tires, and other rubber products;
Other rubber waste: rubber scrap, etc.;
Various types of plastics: waste agricultural mulch film, plastic bags;
Oil sludge: spilled oil sludge, tank-bottom sludge, refinery sludge;

Main components of the Continuous Waste Tyre Recycling Machine
The fully continuous waste tire pyrolysis device includes a waste tire pretreatment system, continuous feeding system, continuous cracking system, automatic slag discharge system, automatic PLC control system, etc. The main part is the continuous pyrolysis system. The continuous waste tire pyrolysis plant is used to process waste tires into fuel oil, carbon black, and non-condensable gas. Fuel oil and carbon black can be sold directly or further processed, and non-condensable gas can be used as heating fuel for the cracking furnace. This continuous device for the pyrolysis of waste tires can keep running 24 hours a day, thus saving energy and time. Greatly reduce the customer's operating costs.

The Feature
1. Fully automatic with low labour cost
Our continuous waste tyre recycling plant is controlled by PLC with an automatic feeding and discharge system, which only needs 1-2 worker for operating the PLC is ok.
2. Fully pyrolysis for high oil output
Oil yield is 50%, carbon black is 45%, and gas is 5%.
3. Big capacity daily
It can process 10 tons to 50 tons of waste tires every day.
4. Continuous operation, no binding
There is a glue removal device inside, and there will be no glue formation in continuous operation.
5. Continuous working saves time and energy
6. Long working life
The main furnace does not need to be cooled and can run continuously for 3 months, reducing the number of thermal expansions and contractions of the equipment, thereby extending the service life of the equipment.
Technical Data
|
Item |
Details |
|
Model |
JZLY-20T |
|
Daily Capacity |
20T |
|
Working Method |
Fully Continuous |
|
Raw Materials |
Waste Plastic, Tyre, Rubber, Oil Sludge |
|
Reactor Size |
D2600*L8000 |
|
Pattern |
Horizontal & Rotary |
|
Heating Materials |
Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc. |
|
Total Power |
75kw/h |
|
Floor Area (L*W*H) |
45*25*10m |
|
Operating Pressure |
Normal Pressure |
|
Cooling Method |
Water Cooling |
|
Life span |
5-8 Years |
Application
For our Continuous Waste Tyre Recycling Machine, the applicable raw materials can be any kind of waste tires, such as bicycle tires, motorcycle tires, car tires, truck tires, OTR tires, etc.
|
|
Tire oil: (1) Direct sales (2) The tire oil is further processed by refining equipment and refined into diesel and gasoline. (3) he pyrolysis oil can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries, or hotels, restaurants, etc. |
|
|
Carbon black: |
Success case

Company Strengths
Extensive Technical Expertise: Over 17 years of R&D experience
Core Patents: Holds more than 10 proprietary patents covering key technologies such as anti-coking and airtight sealing
Industry Standard Setter: Led the formulation of multiple industry standards
One-Stop Service: Provides full-lifecycle services ranging from solution design, equipment manufacturing, and installation/commissioning to after-sales training
F&Q
Q1: What are the feedstock requirements for the Continuous Waste Tyre Recycling Machine?
A: The continuous pyrolysis equipment requires feedstock in the form of rubber powder or rubber blocks; therefore, auxiliary pre-treatment equipment-such as tire shredders and grinders-is necessary.
Q2: What are the product yields of the equipment?
A: Typical yields are: 40–45% pyrolysis oil, 30–35% recovered carbon black, and 5–10% non-condensable gas.
Q3: What are the applications of the pyrolysis oil?
A: With its high calorific value, the pyrolysis oil can be used as industrial fuel for boilers and power plant heating systems; it can also serve as a chemical feedstock for further processing into high-value-added products.
Q4: How many operators are required to run the equipment?
A: Typically, three operators are needed per shift; for a 24-hour operation with three rotating shifts, a total of nine operators are required, plus one maintenance technician and one production manager.
Hot Tags: continuous waste tyre recycling machine, China continuous waste tyre recycling machine manufacturers, suppliers, factory













