Heavy Oil Boiler Burner

 

The Heavy Oil Boiler Burner can burn all flammable liquids as fuel. It adopts the two-stage fire control method, and the burner heats up to 18 million kcal. Using the second-stage combustion control method, the air-fuel ratio is optimized, and it has protection functions such as power failure, low fuel pressure, and low air pressure. Equipped with ion current and electronic eye detection module, ion current and electronic eye double flame detector, to achieve safe, efficient, reliable combustion, no safety hazard. It is widely used in steam boilers, hot water boilers, heat transfer oil furnaces, coal-fired boilers, hot blast stoves, drying furnaces, kilns, ovens and other boilers that require heat sources.

It is widely used in cracking furnaces, waste tire pyrolysis plant, steam boilers, hot water boilers, thermal oil furnaces, coal-fired boilers, hot blast stoves, drying furnaces, kilns, ovens and other boilers that require heat sources.

 

 

 

1. Liquid atomization has smaller molecules and more complete combustion.

2. Fuel consumption is saved by 10% to 20%.

3. Strong anti-corrosion ability, increase the service life of the whole machine

4. All parts are easy to disassemble, clean, repair and replace;

5. Can adapt to any type of combustion chamber;

6. Simple structure, easy to operate and easy to install.

7. Wide range of application, high viscosity fuel oil can be used

8. Flexible flame size adjustment, safe and reliable, and low noise

 

 

Model	ODF-30	ODF-40	ODF-60	ODF-80
Fuel	Methanol, light diesel oil, kerosene and other liquid fuels (heavy oil and waste oil fuels require heavy oil burners)
Air Pressure（MPa)	0.3
Size （mm）	630*650*380	1000*740*430	1030*740*430	1270*850*500
Protection class（IP）	45（The protection level can be increased according to the order requirements）
Air volume adjustment method	Manual damper adjustment	Automatic damper adjustment

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

1. When the equipment is parked, the liquid in the equipment should be drained.

2. Close all valves.

3. Thoroughly clean the surface of the equipment.

4. All rotating parts are coated with anti-grease.

5. Cover all the equipment with canvas to prevent dirt from depositing on the surface of the equipment.

 

 

1. Fuel oil storage conditions: thermal insulation

2. Pipeline transportation conditions: filtration, heat preservation, to ensure the fluidity of heavy oil

3. Preheat before entering the machine: ensure the fluidity of heavy oil

4. Insulation of combustion oil circuit: to ensure the fluidity of heavy oil

 

 

Open the main control valve, start air supply, start the control button, open the second-stage valves in sequence, and check the pressure switch, if the valve group is normal. If there is no leakage point, the fan starts, the air door is fully opened, and the front purging is carried out. After the purging is completed, the air door is automatically closed, and the air supply valve of the first stage is opened, and the air supply is started, and the air regulating valve of the first stage is manually adjusted. The opening degree is from small to large, the ignition needle is ignited, and a period of combustion (constant bright). After the fire detection needle detects the ignition signal, the second-stage valve opens the air supply, and the opening of the air valve increases. Air supply to the second stage. The blast furnace gas burner starts working.

When there is a problem in the leak detection or there is no signal in the fire inspection, the blast furnace gas burner will automatically alarm. The air supply valve is closed at the same time, and the air door is fully opened for purging. The system automatically shuts down after purging. Blast furnace gas burner for troubleshooting. After troubleshooting, reboot.

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, Heavy Oil Boiler Burner, diesel burner, methanol burner, pulverized coal burner, biomass burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the machine installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the machine before delivery?

A: Yes, we will test each machine before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in Heavy Oil Boiler Burner , please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: heavy oil boiler burner, China heavy oil boiler burner manufacturers, suppliers, factory