Pyrolysis Reactor Waste Oil Heaters

 

The waste oil enters the burner in two ways, namely swirl oil and axial flow oil, similar to the internal and external air of the burner. The swirl oil is distributed in a circular shape on the outside; the axial flow oil is a columnar straight jet in the middle. When it reaches the head of the spray gun, it converges in one way, and enters the kiln through the spray hole of the atomizing sheet. The atomizing sheet is divided into various specifications according to the size of the spray hole. During the heating and feeding process, the atomizing tablets of different specifications should be replaced as needed. The structure of the burner at the end of the kiln is the same as that of the kiln head, but the proportion of internal air is much larger than that of the external air. The difference between the oil inlet pipe and the burner at the kiln head is that one way is for oil intake, and the other way is for oil return. The kiln tail burner uses 8.4mm atomizing sheet, and the fuel injection rate is 10 00014 OOOL/h>* the fuel injection rate is 2 SOOL/h.

 

 

1. The fuel is fully atomized and the energy consumption is low.

2. Use fuel oil (bio-oil, heavy oil, diesel oil, alcohol-based fuel, etc.) as fuel, which is clean and environmentally friendly.

3. High combustion efficiency, gasification combustion method and multi-stage air distribution design, the combustion efficiency is as high as 98% or more.

4. High heating temperature.

5. Simple operation: automatic ignition, temperature control, no need for manual work

6. Wide range of applications: suitable for all kinds of life and industrial boilers

 

 

Model	ODF-30	ODF-40	ODF-60	ODF-80
Fuel	Methanol, light diesel oil, kerosene and other liquid fuels (heavy oil and waste oil fuels require heavy oil burners)
Air Pressure（MPa)	0.3
Size （mm）	630*650*380	1000*740*430	1030*740*430	1270*850*500
Protection class（IP）	45（The protection level can be increased according to the order requirements）
Air volume adjustment method	Manual damper adjustment	Automatic damper adjustment

 

 

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Waste Oil Heaters, Industrial Boiler Burner, diesel burner, methanol burner, pulverized coal burner, biomass burner, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the machine installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the machine before delivery?

A: Yes, we will test each machine before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in Waste Oil Heaters, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: pyrolysis reactor waste oil heaters, China pyrolysis reactor waste oil heaters manufacturers, suppliers, factory