Ceramic Sand Rotary Kiln Burner

 

The Ceramic Sand Rotary Kiln Burner is supplied with a flame hood, so that the heavy oil entrained in the air flow cannot be arbitrarily dispersed to produce a suffocating effect", the flame shape is reasonable, avoids the high temperature of the kiln head, and prolongs the service life of the back iron at the kiln mouth. The flame stabilizer is used. , so that the root of the flame can maintain a stable eddy current circulation, reduce the rotation of the inner air, so that the primary air volume can be reduced by half. The outer net air has intermittent rectangular direct air injection, and after reaching the front end of the burner, it is changed to annular gap injection, and at the same time increases The area of the annular gap can lengthen the flame and increase the average temperature in the kiln. The swirling blades are installed at the front end of the inner air duct, 2cm away from the front end of the outer air duct wall, which plays a role in converging the flame and avoids the high temperature of the kiln head. It can be adjusted The handle of the burner and the position of the swirl blade are located at the 6" position of the scale when leaving the factory. The adjustment range is 0 - 6cm, and there is no negative value. The inner wind swirl can only be pulled back to lengthen the flame.

 

 

 

1. Liquid atomization has smaller molecules and more complete combustion.

2. Fuel consumption is saved by 10% to 20%.

3. Strong anti-corrosion ability, increase the service life of the whole machine

4. All parts are easy to disassemble, clean, repair and replace;

5. Can adapt to any type of combustion chamber;

6. Simple structure, easy to operate and easy to install.

7. Wide range of application, high viscosity fuel oil can be used

8. Flexible flame size adjustment, safe and reliable, and low noise

 

 

Model	ODF-30	ODF-40	ODF-60	ODF-80
Fuel	Methanol, light diesel oil, kerosene and other liquid fuels (heavy oil and waste oil fuels require heavy oil burners)
Air Pressure（MPa)	0.3
Size （mm）	630*650*380	1000*740*430	1030*740*430	1270*850*500
Protection class（IP）	45（The protection level can be increased according to the order requirements）
Air volume adjustment method	Manual damper adjustment	Automatic damper adjustment

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

1. When the equipment is parked, the liquid in the equipment should be drained.

2. Close all valves.

3. Thoroughly clean the surface of the equipment.

4. All rotating parts are coated with anti-grease.

5. Cover all the equipment with canvas to prevent dirt from depositing on the surface of the equipment.

 

 

1. Fuel oil storage conditions: thermal insulation

2. Pipeline transportation conditions: filtration, heat preservation, to ensure the fluidity of heavy oil

3. Preheat before entering the machine: ensure the fluidity of heavy oil

4. Insulation of combustion oil circuit: to ensure the fluidity of heavy oil

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, Ceramic Sand Rotary Kiln Burner, diesel burner, methanol burner, pulverized coal burner, biomass burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the machine installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the Ceramic Sand Rotary Kiln Burner before delivery?

A: Yes, we will test each Ceramic Sand Rotary Kiln Burner before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in Ceramic Sand Rotary Kiln Burner, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: ceramic sand rotary kiln burner, China ceramic sand rotary kiln burner manufacturers, suppliers, factory