Waste Tire Pyrolysis Boiler Burners

 

The fuel oil contains (pyrolysis oil, diesel, heavy oil, residual oil, tar, etc.) burner has the characteristics of good atomization effect, convenient ignition, combustion, stable flame, strong rigidity, no coking, no clogging, and long service life. It can burn light oil, heavy diesel oil, heavy oil, residual oil, tar, asphalt, pyrolysis oil and other liquid fuels. Liquid mist particles (SMD<40 microns) with uniform size distribution (size distribution index N>2). The fuel atomization effect is basically not affected by the fuel viscosity. The size of the oil hole and the size of the air hole of the nozzle are large, and it is not easy to be blocked and coked. The atomization consumes less air and consumes less energy. Flame length, flame cone angle and flame shape can be designed according to user requirements. The flame stiffness is strong and the flame jet speed is high. Realize direct ignition and combustion of heavy residual oil in cold state. The flow adjustment range is more than 1:4. The average fuel saving rate of burning heavy residual oil is more than 8%, and the average fuel saving rate of burning diesel oil is more than 4% (relative to the old burner)

 

 

1. The flame stabilizer is used, so that the root of the flame can maintain a relatively stable eddy current cycle, reduce the rotation of the inner wind, and then reduce the primary air volume by half.

2. The external net air has intermittent rectangular straight air jets, which become annular gap jets after reaching the front of the equipment, and increasing the area of the annular gap can increase the flame and increase the average temperature in the furnace.

3. The flame hood is used to prevent the heavy oil mixed in the air flow from dispersing at will to form a suffocating effect. The flame shape is more scientific and reasonable, preventing the high temperature of the kiln head and increasing the service life of the back iron at the kiln mouth.
4. The central wind blows the high-temperature gas near the nozzle back, which not only cools the inside of the nozzle, but also cools the end face, thereby protecting the head of the heavy oil burner and increasing the service life of the equipment.
5. The swirling blade is installed in front of the inner air duct and 2cm away from the front of the outer air duct wall, which has the function of closing the flame and preventing the high temperature of the kiln head. It can adjust the first handle of the heavy oil burner. The part of the swirl blade is fixed at the "6" position of the scale when it leaves the factory. The adjustment range is 0-6cm, and there is no negative value. The inner wind swirl can only be pulled back. , to increase the flame.

 

 

Model	617M P100N
Thermal Power	285/490~1140 KW ----25/43~100KG/H
Fuel	Heavy oil: 50°C, 50mm2/s (7°E), to the maximum viscosity of 500mm2/s, (65°E) with special components Viscosity of light oil at -20°C: 60mm2/s max (1.5°E)
Run	Level 1 - Level 2
Power Supply	3N~230V ±10% ~50HZ without neutral 400V ±10% ~50HZ with neutral
Motor	6A/230V ~3.5A/400V
Ignition Transformer	Level 1：2A Level 2：2*6.5KV 35MA
Oil Heater Power	7KW
Electric Power Consumption	9KW
Oil Pump	200KG/H 20bar

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, methanol burner, pulverized coal burner, biomass burner, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the machine installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the machine before delivery?

A: Yes, we will test each machine before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in Boiler Burners, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: waste tire pyrolysis boiler burners, China waste tire pyrolysis boiler burners manufacturers, suppliers, factory