Heavy Oil Burners

 

 

Under the action of gravity or siphon, heavy oil (maximum viscosity less than or equal to 50E, 50 degrees Celsius) enters the burner for heating (thermostatic electric heater). The oil pump produces 16-25kg pressure fuel, which is heated by the solenoid valve. After the on/off is sent to the fuel injector for atomization and mixed with the primary air, it is ignited by a high-voltage electric spark to generate a flame. Through the action of the flame disc (smoke stabilization disc), it is re-mixed with the secondary air to form a rotating and stable combustion Flame. After the fuel injector is atomized and mixed with the primary air, it is ignited by a high-voltage electric spark to generate a flame. Through the action of the flame disc (smoke stabilization disc), it is mixed with the secondary air again to form a rotating and stable combustion flame. After the nozzle is atomized and mixed with the primary air, it is ignited by a high-voltage electric spark to generate a flame. Through the action of the flame disc (smoke stabilization disc), it is mixed with the secondary air again to form a rotating and stable combustion flame.

 

 

1. Good atomization, low energy consumption and low noise

This type of burner uses high-pressure atomized fuel oil. When the oil pressure is greater than or equal to 0.9MPa, a good atomization effect can be obtained, with less energy consumption and low noise.

 

2. The oil and air are well matched, the flame is stable, the combustion efficiency is high, and there is no pollution to the environment.

The burner fully mixes the fuel oil with the combustion-supporting air to obtain good combustion conditions, and the recirculation of the swirling wind and the high-temperature flue gas burns again, greatly increasing the temperature of the flame. Complete combustion is achieved, the emission is completely qualified, and there is no pollution to the environment.

 

3. Safe and reliable automatic control

Using flame monitoring and combustion control, according to the safety requirements of use, fully automatic control of air supply, ignition, fuel injection, combustion, shutdown, restart, etc. is realized, which fully meets the process requirements of boilers, kitchen utensils, kilns, etc. When one link fails, it can automatically stop.

 

4. Compact structure and easy installation

All parts of the burner are integrated into a compact structure. Equipped with a slip-on mounting flange, it fits on the burner behind the burner head, just fix the flange to the stove. Press the power button to start operation.

 

 

Calorie output: 200,000 kcal - 18 million kcal

Output power: 0.4MW-21MW

Adjustment method: smooth second stage fire

Control method: PLC man-machine integrated analog control

Air volume and oil volume control: Servo motor controls the damper

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pryolsyis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, diesel burner, heavy oil burner, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by eputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will depelope us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we build a shredder, can we use it to shred other materials?

A: We are a factory, established in 2007, specializing in the manufacture of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners.

 

Q: Can the heavy oil burner use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which is easy to block the nozzle.

 

Q: How to choose a suitable burner?

A: According to the required calorific value, fuel, boiler size and other parameters.

 

Q: How about the machine installation?

A: For the installation of the burner, we will provide you with wiring diagrams and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: How about spare parts?

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

Q: Will you test the Heavy Oil Burners before delivery?

A: Yes, we will test each Heavy Oil Burners and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

 

If you are interesting in Heavy Oil Burners, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: heavy oil burners, China heavy oil burners manufacturers, suppliers, factory