35 Tons Dryer Biomass Straw Burner

 

Biomass combustion burner is a bio-suction semi-gasification automatic control burner, a biomass pyrolysis burner with particles as fuel.

Advantages and advantages of bio-burner

The biomass straw burner has the characteristics of high efficiency, energy saving, low carbon and environmental protection, high thermal efficiency, stability and reliability, and a wide range of applications.

More and more boilers, Xiaosheng power station boilers, hotels, restaurants, bathrooms, institutions, schools, and residential areas have begun to switch from traditional boilers to biomass burner boilers.

 

 

 

The overall work of 35 tons dryer biomass straw burner is divided into three stages:

1. Ignition stage: first, the feeding dragon of the burner is powered on to carry out the pre feeding action. After feeding, turn on the blower and the ignition rod to carry out the ignition action. The ignition time is about five minutes. Due to different materials and different ignition methods, the time length is different!

2. Feeding stage: after the ignition is successful, enter the fire feeding stage. The fire feeding is mainly composed of feeding and air supply. The feeding speed can be changed by the frequency converter or adjusted by the time interval mode, and the air supply size can be adjusted by the frequency converter!

3. Heating stage: the heating stage is a large fire. After the temperature reaches the set value, it enters the small fire stage, which can effectively avoid the waste of fuel. When the temperature is low, the fire will burn again! Repeat the switch back and forth! When the machine is no longer in use, it will enter the shutdown stage. In the shutdown stage, the blower will delay shutdown to blow out the fire in the furnace to avoid the formation of flue gas!

 

 

1. Stable performance

The stability of each component and the high degree of cooperation between each other

2. Easy to operate

The 300,000-calorie biomass burner equipment is controlled by frequency conversion, the control cabinet is operated by buttons, and simple training can be used.

3. Small footprint

On the premise of ensuring the normal performance of the biomass burner, the size of the biomass burner is reduced.

4. Energy saving and environmental protection

The biomass burner uses environmentally friendly fuel, which is also advocated by the country as energy, biomass pellet fuel, and various emission indicators have reached the national standard.

5. It is more cost-effective than burning coal with fuel

Using biomass fuel can reduce fuel procurement costs by four to five times

6. Its fuel is an environmentally friendly renewable energy that the state encourages and promotes - biomass pellet fuel

 

 

Length, width and height: 1800*1000*1300mm;

Control cabinet: 50*25*59mm;

Nozzle diameter: 219mm;

The height of the center of the nozzle: 500mm;

Bottom blower: 550w;

Secondary oxygen supply: 550w;

Feed delivery: 250w;

Silo size: 500*500*500;

 

 

 

 

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

Any equipment may have problems during operation, so will 35 tons dryer biomass straw burners also have problems?

Zhengzhou Odifei Machinery Equipment Co., Ltd. 35 tons dryer biomass straw burner manufacturers will introduce you to seven problems and solutions about 35 tons dryer biomass straw burners:

Common problems of 35 tons dryer biomass straw burner (1). Jam (feeder cannot run):

The data on the man-machine interface feeding motor pattern jumps from 2000 to 0 value and cannot be normal after 3 cycles.

Solution 1: Check the temperature reading of the machine, if it is lower than 150 degrees, appropriately increase the constant value of the small fan or reduce the constant value of the feed in the parameter setting bar of the man-machine interface, and then manually press the manual reverse button 10-20 seconds.

Solution 2: Carry out maintenance such as cleaning the slag.

 

Common problems of 35 tons dryer biomass straw burners (2). The temperature of the machine is too high

High temperature phenomenon 1.

The temperature of the machine is too high during normal heating.

Solution for high temperature: appropriately increase the value of the feed constant or decrease the value of the small fan constant. can also be adjusted simultaneously.

High temperature phenomenon 2.

The temperature of the machine is too high during heat preservation

Solution to the phenomenon of excessive temperature: appropriately increase the proportional constant value of the small fan or decrease the proportional constant value of the large fan.

 

Common Problems of 35 tons dryer biomass straw burners (3). Smoke from the storage box

Burner smoke solution: perform maintenance.

 

Common problems of 35 tons dryer biomass straw burners (4). Slow heating

Solution: Properly increase the constant value of feed, small fan and large fan (pay attention to proportional adjustment).

 

Common problems of 35 tons dryer biomass straw burners (5) Easy to break off the fire (there is a popping sound) and smoke from the crater

Solution:

1. Lower the value of the large fan constant or increase the value of the proportional constant of the large fan.

2. Increase the constant value of the small fan.

 

Common problems of 35 tons dryer biomass straw burner (6) The temperature of the machine is too low:

Solution: increase the value of the small fan constant or decrease the value of the feeding constant.

 

Common Problems of 35 tons dryer biomass straw burners (7) Too much dust ejected

Solution: Reduce the value of the small fan constant.

 

 

Pre-Sale Service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale Service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc. ).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, biomass pellet burners, pulverized coal burner, biomass burner, biomass pellet burner,biomass straw burner, wood pellet burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, biomass pellet burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the biomass straw burner installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the biomass straw burner before delivery?

A: Yes, we will test each biomass straw burner before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in 35 tons dryer biomass straw burner, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: 35 tons dryer biomass straw burner, China 35 tons dryer biomass straw burner manufacturers, suppliers, factory