Working Principle Of Biomass Burner
The Biomass Burner is mainly composed of a furnace combustion system, a primary oxygen distribution system, a secondary oxygen distribution system, a safety monitoring system, an ignition system and a feeding system. In addition, there are two different cooling models, air-cooled and water-cooled. Some high-end products also have remote control systems, which can automatically optimize combustion through big data, achieve more balanced and reasonable combustion, and achieve the purpose of energy saving!
Control Process And Mode
The overall work of Biomass Burner is divided into three stages:
1. Ignition stage: first, the feeding dragon of the burner is powered on to carry out the pre feeding action. After feeding, turn on the blower and the ignition rod to carry out the ignition action. The ignition time is about five minutes. Due to different materials and different ignition methods, the time length is different!
2. Feeding stage: after the ignition is successful, enter the fire feeding stage. The fire feeding is mainly composed of feeding and air supply. The feeding speed can be changed by the frequency converter or adjusted by the time interval mode, and the air supply size can be adjusted by the frequency converter!
3. Heating stage: the heating stage is a large fire. After the temperature reaches the set value, it enters the small fire stage, which can effectively avoid the waste of fuel. When the temperature is low, the fire will burn again! Repeat the switch back and forth! When the machine is no longer in use, it will enter the shutdown stage. In the shutdown stage, the blower will delay shutdown to blow out the fire in the furnace to avoid the formation of flue gas!
Features
1. Stable performance
The stability of each component and the high degree of cooperation between each other
2. Easy to operate
The 300,000-calorie Biomass Burner equipment is controlled by frequency conversion, the control cabinet is operated by buttons, and simple training can be used.
3. Small footprint
On the premise of ensuring the normal performance of the Biomass Burner, the size of the Biomass Burner is reduced.
4. Energy saving and environmental protection
The Biomass Burner uses environmentally friendly fuel, which is also advocated by the country as energy, biomass pellet fuel, and various emission indicators have reached the national standard.
5. It is more cost-effective than burning coal with fuel
Using biomass fuel can reduce fuel procurement costs by four to five times
6. Its fuel is an environmentally friendly renewable energy that the state encourages and promotes - biomass pellet fuel
Technical Parameter
|
Model |
0.5T |
Dimensions |
1800*1000*1300mm |
|
Control cabinet |
50*25*59mm |
Bottom Blower |
550w |
|
Nozzle diameter |
219mm |
Secondary Oxygen Supply |
550w |
|
Nozzle center height |
500mm |
Silo Size |
500*500*500mm |
Components

Application Range
1. Applied to various boilers: such as garment factories, catering industries, etc.,
2. Applied to powder spray drying production line,
3. Applied to zinc-aluminum alloy die-casting industry
4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

Installation Method

There Are Many Reasons For Black Smoke From Biomass Pellet Burner
1. Biomass pellet fuel has poor quality, contains many impurities and excessive moisture, which affects the full combustion of biomass pellet fuel;
2. The design of biomass particle combustor is unreasonable, which can not reasonably match fuel and air distribution, and the insufficient combustion causes black smoke;
3. The biomass combustors produced by some small plants have no secondary air distribution design at all, or do not know how to design reasonable secondary air distribution of biomass combustors, and the distribution is insufficient. The biomass fuel is first cracked and burned in the biomass pellet burner, and forms combustible gas with the secondary air at the burner nozzle for secondary combustion. Therefore, if the secondary air is insufficient, it will cause insufficient combustion and black smoke.
4. The air duct of biomass pellet burner is not smooth, and the furnace ash has not been cleaned, which affects the air distribution, resulting in insufficient combustion and black smoke;
5. During the operation of biomass particle combustor, improper use of operators and improper air distribution operation lead to low furnace temperature. The combustion of biomass particle fuel requires sufficient oxygen. Insufficient oxygen supply will lead to black smoke during combustion.
How to solve the problem of black smoke from biomass pellet burner?
The above is the analysis of the reasons why the biomass pellet burner emits black smoke. Through summarization, we found that the black smoke emitted by the biomass pellet burner is often mainly caused by insufficient oxygen supply and insufficient combustion. Therefore, we need to adjust the material to see if there is too much fuel, whether the blast and induced air are used properly, and then the problem of fuel quality. If the above problems are not the case, then the design of the biomass pellet burner must be considered. Whether there is a defect in the manufacturing itself, we can find out what caused the black smoke through the elimination method, and then solve the problem.
Our Guarantees And Services
Pre-Sale Service:
- Guide customers to choose the appropriate equipment model.
- Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
- We can design and manufacture products according to the special needs of customers to meet the different needs of investors
On Sale Service:
- Strict inspection of products before leaving the factory
- Ships according to contract
After-sale Service:
- The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
- If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
- After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, Biomass Burners, pulverized coal burner, biomass burner, Biomass Burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!
FAQ
Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?
A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, Biomass Burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.
Q: Can heavy oil burners use light diesel as fuel?
Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.
Q: How to choose the right burner?
A: According to the required heat, fuel, boiler size and other parameters.
Q: How is the machine installation?
A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.
Q: What about spare parts?
A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.
Q: Will you test the Biomass Burner before delivery?
A: Yes, we will test each Biomass Burner before shipment and send you the working video. You can also contact us before delivery.
Q: Can I be an agent of the burner in our area?
A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

If you are interesting in Biomass Burner, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: biomass burner, China biomass burner manufacturers, suppliers, factory











