Home-Products- Burner - Biomass Burner-

Content

video

Wood Pellet Burner

The biomass burner is a biomass semi-gasification automatic control burner that uses biomass particles, sawdust, wood powder, wood particles, rice husk particles, peanut shell particles, nut shells, fungus sticks and other agricultural and forestry solid wastes as fuel.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Working Principle Of Wood Pellet Burner

 

The biomass burner is a biomass semi-gasification automatic control burner that uses biomass particles, sawdust, wood powder, wood particles, rice husk particles, peanut shell particles, nut shells, fungus sticks and other agricultural and forestry solid wastes as fuel.

The biomass burner saves 75% of the combustion cost than electricity, 60% of fuel oil, 50% of natural gas, 40% of liquefied gas, and zero pollution. The liner of the biomass burner is made of zirconium-silicon crystal, which is fired in a high-temperature furnace after high-pressure casting. It needs to be fired at a temperature above 1000 °C for three days without loose pores.

Biomass burner, a biomass semi-gasification automatic control burner, biomass pyrolysis burner with biomass particles, sawdust, wood powder, sawdust and other organic biomass as fuel, generally divided into air-cooled biomass There are two types of burner and water-cooled biomass burner.

 

1

 

Control Process And Mode

 

The overall work of wood pellet burner is divided into three stages:

1. Ignition stage: first, the feeding dragon of the burner is powered on to carry out the pre feeding action. After feeding, turn on the blower and the ignition rod to carry out the ignition action. The ignition time is about five minutes. Due to different materials and different ignition methods, the time length is different!

2. Feeding stage: after the ignition is successful, enter the fire feeding stage. The fire feeding is mainly composed of feeding and air supply. The feeding speed can be changed by the frequency converter or adjusted by the time interval mode, and the air supply size can be adjusted by the frequency converter!

3. Heating stage: the heating stage is a large fire. After the temperature reaches the set value, it enters the small fire stage, which can effectively avoid the waste of fuel. When the temperature is low, the fire will burn again! Repeat the switch back and forth! When the machine is no longer in use, it will enter the shutdown stage. In the shutdown stage, the blower will delay shutdown to blow out the fire in the furnace to avoid the formation of flue gas!

 

Technical Parameter

 

Burner Specifications

Overall Dimensions

Machine Weight

Flamethrower Diameter

Number of Igniters

Burning Materials/H

Motor

Fan

200,000 kcal

65*58*110cm

125KG

16CM

1 piece

10-356KG

250W

240W

400,000 kcal

65*58*110cm

135KG

22CM

1 piece

15-50KG

250W

240W*2

600,000 kcal

65*58*110cm

150KG

27CM

2 pieces

20-90KG

250W

240W+330W

800,000 kcal

88*78*137cm

200KG

27CM

2 pieces

30-120KG

250W

240W+550W

1 million kcal

110*88*163cm

240KG

27CM

2 pieces

40-150KG

250W

240W+330W+550W

1.2 million kcal

110*88*163cm

280KG

27CM

2 pieces

50-200KG

250W

240W+550W*2

1.6 million kcal

110*88*163cm

320KG

33CM

2 pieces

60-250KG

250W

330W*2+550W*2

 

Features

 

1. Environmental protection: Since the entire combustion process is a semi-gas combustion process, all volatiles are decomposed into combustible gases, participating in combustion, with high combustion efficiency and low smoke and dust content. While improving the combustion efficiency, the investment in secondary smoke and dust removal facilities and the use of chemicals are reduced. This alone saves 40% of operating costs compared to conventional boilers.

2. Energy saving: Because the semi-gasification combustion produces less smoke and dust, and no tar is produced, the impact on the boiler is small, and the traditional combustion method reduces the maintenance frequency of the boiler, thereby greatly improving the heat energy conversion efficiency.

3. Wide adaptability: can operate independently or in parallel. It can be used as a boiler or transform other energy-consuming equipment, such as drying, smelting, calcining and other equipment. As long as the biomass semi-gasification burner is added to input the required thermal energy according to the boiler power, there is no need to change the original boiler body. This equipment can be docked with any heat exchanger to provide it with the required heat source, which can be large or small and can be used in various industries.

4. Convenient operation: one feeding can automatically run continuously for more than 5 hours, the electric control adopts PLC automatic control, intelligent chain operation, and the slag cleaning system is simple. Low labor intensity, saving labor.

5. Wide range of fuel applications: suitable for biomass fuels of various densities. The shape can be irregular block or granular fuel below 80mm, and the moisture can be within 30%, which can greatly reduce the fuel processing cost.

6. Save operating costs: research, develop and utilize the physical and chemical properties of biomass fuels, which can be applied to various biomass fuels and are substitutes for primary energy such as coal, oil, and gas. The operating cost is 90% for coal, 30% for fuel, and 40% for gas. The environmental protection indicators are all lower than the environmental protection standards. It has strong market adaptability and can adapt to various energy needs, ranging from single-family to large-scale heating, industrial production and power generation.

 

Installation Method

 

image005

 

Schematic Diagram

 

4

 

Application Range

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

5. Applied to boilers, Xiaosheng power station boilers, hotels, restaurants, bathrooms, institutions, schools, and residential areas

 

image003

 

Maintenance

 

There are many reasons for black smoke from biomass burner:

1. Biomass pellet fuel has poor quality, contains many impurities and excessive moisture, which affects the full combustion of biomass pellet fuel;

2. The design of biomass particle combustor is unreasonable, which can not reasonably match fuel and air distribution, and the insufficient combustion causes black smoke;

3. The biomass combustors produced by some small plants have no secondary air distribution design at all, or do not know how to design reasonable secondary air distribution of biomass combustors, and the distribution is insufficient. The biomass fuel is first cracked and burned in the biomass burner, and forms combustible gas with the secondary air at the burner nozzle for secondary combustion. Therefore, if the secondary air is insufficient, it will cause insufficient combustion and black smoke.

4. The air duct of biomass burner is not smooth, and the furnace ash has not been cleaned, which affects the air distribution, resulting in insufficient combustion and black smoke;

5. During the operation of biomass particle combustor, improper use of operators and improper air distribution operation lead to low furnace temperature. The combustion of biomass particle fuel requires sufficient oxygen. Insufficient oxygen supply will lead to black smoke during combustion.

 

How to solve the problem of black smoke from biomass burner?

The above is the analysis of the reasons why the biomass burner emits black smoke. Through summarization, we found that the black smoke emitted by the biomass burner is often mainly caused by insufficient oxygen supply and insufficient combustion. Therefore, we need to adjust the material to see if there is too much fuel, whether the blast and induced air are used properly, and then the problem of fuel quality. If the above problems are not the case, then the design of the biomass burner must be considered. Whether there is a defect in the manufacturing itself, we can find out what caused the black smoke through the elimination method, and then solve the problem.

 

Our Guarantees And Services

 

Pre-Sale Service:

  • Guide customers to choose the appropriate equipment model.
  • Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
  • We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

  • Strict inspection of products before leaving the factory
  • Ships according to contract

 

After-sale Service:

  • The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc. ).
  • If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
  • After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

About Odifei Company

 

11

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, biomass pellet burners, pulverized coal burner, biomass burner, biomass pellet burner,Biomass heating system, wood pellet burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

FAQ

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, biomass pellet burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is thewood pellet burner installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test thewood pellet burner before delivery?

A: Yes, we will test eachwood pellet burner before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

6

 

If you are interesting in wood pellet burner, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: wood pellet burner, China wood pellet burner manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY