Waste Agricultural film pyrolysis equipment
Waste agricultural film pyrolysis equipment is an environmentally friendly resource recycling system specifically designed for processing agricultural plastic waste such as waste agricultural mulch film, greenhouse film, and seedling film. The equipment employs low-temperature, oxygen-free, and slightly positive-pressure pyrolysis technology. Through continuous high-temperature heating, it decomposes the high-molecular polymers in the agricultural film into smaller-molecule compounds, ultimately converting them into recyclable products such as fuel oil, combustible gas, and carbon black.

The Working principle for Waste Agricultural film pyrolysis equipment
The core working principle of waste agricultural film pyrolysis equipment is based on the thermal decomposition reaction of plastics under anaerobic or oxygen-deficient conditions.
Step 1: Raw Material Pretreatment
Collected waste agricultural film often contains impurities such as soil, stones, and straw, and has a high moisture content. The pretreatment stage requires removing large impurities, reducing some moisture, and performing simple crushing. Considering the high density of agricultural film, it is recommended to bundle it before loading it into the pyrolysis furnace, which can effectively increase the actual loading capacity of the furnace.
Step 2: Closed-Loop Feeding
The crushed waste agricultural film is pushed into a fully enclosed pyrolysis furnace via a hydraulic automatic feeder or screw conveyor.
Step 3: High-Temperature Pyrolysis
In a fully enclosed, oxygen-free environment, the equipment heats the agricultural film to 260-420℃. Under these temperature conditions, the main component of the agricultural film-polyethylene (PE) and other high-molecular polymers-undergoes a thermal decomposition reaction: long-chain polymers break down and decompose into small-molecule oil and gas. The entire decomposition process lasts approximately 8-10 hours.
Step 4: Condensation and Oil Recovery
The oil and gas produced by pyrolysis are discharged through pipelines and enter the downstream circulating water condensation system. The oil and gas gradually condense into fuel oil; the non-condensable gases (i.e., cracked gases) are fed into the upstream heating system for use as fuel, achieving energy self-sufficiency.
Step 5: Slag Removal and Flue Gas Treatment
After pyrolysis, the residual carbon black in the furnace is automatically discharged after the furnace body cools to room temperature. The flue gas produced by combustion undergoes multi-stage treatment including cooling, desulfurization, denitrification, and dust removal to meet national and local environmental standards before being emitted.

Parameters of tWaste Agricultural film pyrolysis equipment
| Items | Contents |
| Raw material can be pyrolysed | Waste aluminum-plastic panels, aluminum-plastic panel scraps, and discarded aluminum-plastic panel tailings. |
| Model | ODF-1T~ODF-50T |
| Capacity | 30kg-15tons/day |
| Operating pressure | Normal pressure |
| Heating material | Fuel oil, wood, charcoal, natural gas, Non-condensable gas |
| Material of refining reactor | Q245R, Q345R boiler plate, Stainless steel, customized |
| Thickness of reactor | 16- 20 mm, customized |
| Reactor rotation speed | 0.4-0.8 turn/minute |
| Mode of cooling | Water cooling |
| Power in total | 15-35kw |
| Noise dB(A) | ≤85 |
| Manpower | 1~3 per shift |
Picture of Waste Agricultural film pyrolysis equipment

Advantages of the Waste Agricultural film pyrolysis equipment
1. High-efficiency oil production, significant economic benefits
The main component of waste agricultural film is PE (polyethylene). The oil yield from the pyrolysis of pure PE plastic can reach 95%. Considering the impurities contained in waste agricultural film, the actual oil yield is generally 50%-70%. A set of equipment processing 10 tons of agricultural film per day can produce approximately 8 tons of fuel oil daily. At a market price of $600-900/ton, the daily output value is considerable. The pyrolysis oil has a calorific value between 10,000-10,300 kcal, is high in calorific value, and has wide applications.
2. Strong raw material adaptability, no need for deep cleaning
Unlike traditional granulation recycling methods, pyrolysis technology does not require deep cleaning of the agricultural film and has strong tolerance to soil, impurities, and moisture. Waste agricultural film covered in soil can be directly fed into the system, significantly reducing pretreatment costs.
3. Environmentally Compliant, No Secondary Pollution
The equipment operates under a micro-negative pressure seal, equipped with a complete waste gas treatment system (cooling, desulfurization, denitrification, dust removal), ensuring emissions meet or exceed national standards. Non-condensable gases are recycled for heating, achieving energy recycling.
4. Three Processes, Flexible Adaptability
The waste agricultural film pyrolysis equipment offers three main processes: intermittent, semi-continuous, and fully automatic continuous. While the working principles are the same, the differences lie in operating modes, automation levels, feeding and slag discharge methods, production efficiency, and environmental protection standards, catering to the needs of customers of varying sizes.
5. Modular Design, Convenient Installation
The equipment adopts a modular and intelligent oil refining production line design, facilitating subsequent delivery, installation, and flexible commissioning. It mainly consists of a feeding system, pyrolysis system, condensation system, slag discharge system, PLC control system, and flue gas/tail gas treatment system.
Final Products usage

Application of Waste Agricultural film pyrolysis equipment
Compared to traditional incineration or landfill methods, pyrolysis technology offers significant advantages such as no secondary pollution, high resource recovery rate, and substantial economic benefits. It is particularly suitable for processing waste agricultural films with attached soil, high moisture content, and difficulty in recycling through granulation.
The equipment can process a wide range of raw materials, including:
Agricultural mulch film (PE material): Insulating and moisture-retaining film for covering soil surfaces
Greenhouse covering film: Transparent film for greenhouses and vegetable sheds
Seedling covering film: Film for covering seedling trays and seedbeds
Fruit bagging: Plastic bags for protecting fruits from damage and pests
Agricultural packaging bags: Plastic packaging bags for seeds, fertilizers, and feed
Drip irrigation pipes/belts: Polyethylene pipes for agricultural irrigation
Running video of the
F&Q
1. Can the waste agricultural film pyrolysis equipment process all types of agricultural film?
A: It can process over 95% of common agricultural films, including mulch film (PE), greenhouse film, seedling film, fruit bags, agricultural packaging bags, etc. The best results are achieved with agricultural films whose main component is polyethylene (PE), with an oil yield of 50-70%. It should be noted that PVC and PET plastics are not suitable for pyrolysis oil extraction.
2. Agricultural film pyrolysis easily produces wax buildup. How can this be addressed?
A: Waste agricultural film does tend to produce wax buildup during pyrolysis. Our Jinzhen company's pyrolysis equipment is equipped with an automatic decoking device and a dewaxing system, which can reduce wax buildup and extend the service life of the pyrolysis reactor.
3. What is the oil yield?
A: The oil yield of pure PE plastic can reach 95%; however, due to the presence of impurities such as soil in waste agricultural film, the actual oil yield is generally 50%-70%. The specific oil yield depends on the quality of the raw materials and process control.
4. What is the equipment's service life? A: The furnace shell is made of Q345R boiler plate, 14- 18 mm thick, resistant to high temperatures and corrosion, and has a long design life. Core components are covered by warranty.
5. What are the different process types of the equipment? How to choose?
A: There are mainly three types: intermittent, semi-continuous, and fully automatic continuous. Intermittent is suitable for small-scale processing; semi-continuous is suitable for medium-scale; fully automatic continuous is suitable for large-scale projects with high automation requirements.
6. What after-sales services do you provide?
A: We provide comprehensive technical support and after-sales services, including equipment installation and commissioning, operation training, and lifetime technical maintenance.
Hot Tags: Waste Agricultural film pyrolysis equipment, China Waste Agricultural film pyrolysis equipment manufacturers, suppliers, factory









