Home-Products- Burner - Heavy Oil Burner-

Content

video

Pulverized Coal Burner

Adopt a new structure, change the mechanism of the traditional burner, and use the combustion chamber rotation method to solve the defects of the traditional burner, such as easy slagging and incomplete combustion.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Working Principle Of Pulverized Coal Burner

 

MFR4000 type rotary pulverized coal burner

Asphalt mixing plant (equipment) suitable for 280-320t/h output.

 

Features

 

■ Adopt a new structure, change the mechanism of the traditional burner, and use the combustion chamber rotation method to solve the defects of the traditional burner, such as easy slagging and incomplete combustion.

■ High flame temperature, energy saving and full combustion.

■ High-performance refractory bricks are used to prolong the service life.

■ Continuous production is possible, no need to clean slag every day.

■ The production cost is low, only 1/2 of the oil burner.

 

Technical Parameter

 

Output comparison table of Pulverized Coal Burner

Model

Power (kw)

Rated coal consumption(kg/h)

Mixer output(t/h)

Material temperature control

MFR4000

194.95

3660

280-320

130-180℃

 

Pulverized Coal Burner Configuration

Model

Main engine

Pulverizer

Fuel igniter

Distribution Cabinet

MFR4000

LTZ320

FMJ120+FMJ120+FMJ120

RYDH

PD320

 

Fuel requirements for MFR4000 pulverized coal burner

1. The fuel used in the fuel igniter is No. 0 diesel

2. Coal quality requirements

Bituminous Coal

(1) Calorific value ≥25kJ

(2) Volatile matter ≥ 25%

(3) Ash content 8~10%

(4) Total moisture content of 3 to 4%

(5) Total sulfur content ≤ 1%

(6)Particle size 20mm

 

Application Range

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

1

 

Maintenance Method

 

1. Open the pulverized coal burner and check whether the coal hammer is damaged. If the damage is serious, it needs to be replaced;

2. Check whether the anchor bolts connecting the fan impeller are loose, and whether the blades are seriously damaged. If they are loose, they should be reinforced or replaced in time.

3. Check whether the anchor bolts outside the equipment are firm, check the fouling in the combustion furnace, and repair the charge.

4. Check whether the wear-resistant lining plate at the damaged part is loose from the anchor bolts that are fixed to the human body. The loosening should be firm. If the wear-resistant lining plate is seriously damaged, the parts should be replaced.

5. The pulverized coal burner should check the lubrication of the rolling bearings in the front and rear rolling bearing chambers of the servo motor. If the vegetable oil is found to be fouled, the lubricating oil should be removed and replaced, and whether to replace it should be decided according to the damage of the rolling bearing.

 

Video of the Pulverized Coal Burner

 

Hot Tags: pulverized coal burner, China pulverized coal burner manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY