Home-Products - Pyrolysis Machine-

Content

Oil Sludge Pyrolysis Plant

Oil Sludge Pyrolysis Plant

Our oil sludge pyrolysis plant can convert the waste oil sludge into pyrolysis oil and residue. At the same time, the waste oil distillation plant can also convert pyrolysis oil into higher-quality oil.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Oil Sludge Pyrolysis Plant

Oil Sludge Pyrolysis Plant
Oil Sludge Pyrolysis Plant

An oil sludge pyrolysis plant is one kind of pyrolysis machine. Usually, in the pyrolysis reactor without oxygen, the oil sludge is heated to 300-500°C, and then it can be converted into pyrolysis oil, which is obtained after condensation. Oil-free residue was collected centrally. Our Jinzhen oil sludge pyrolysis machine can customize the oil sludge pyrolysis plant depending on your daily capacity. Besides, this machine has a dedusting system to purify the smoke. So, this is a very environmentally friendly device.

Oil Sludge Pyrolysis Plant

Main process flow of Oil Sludge Pyrolysis Plant

Feeding: Waste oily sludge is fed into the pyrolysis reactor via a feeder. The reactor is heated and undergoes high-temperature pyrolysis.

Pyrolysis process: When the pyrolysis reactor reaches a certain temperature, a large amount of oil and gas is generated. The oil and gas enter the gas separator and then enter the condensation system for condensation.

Condensation: The oil and gas are condensed into fuel oil. The remaining non-condensable gas passes through the exhaust gas purification system and can be used as fuel for combustion in the reactor.

Dust removal: The flue gas generated during combustion in the pyrolysis reactor is treated by the environmental protection system and discharged after meeting national environmental protection standards. After the pyrolysis reactor cools down, the slag is discharged.

Output Products & Yield

After treatment by the Oil Sludge Pyrolysis Plant, the final products include pyrolysis oil, combustible gas, water, and sand. Because the composition of oil sludge is quite complex, with varying water and oil content. So the oil yield is not fixed; Normally, the oil output is between 20%-90%. If you want to know the precise output, you can take about 50 kg of oil sludge when visiting our factory, and we can do the test for you.

Picture of the Oil Sludge Pyrolysis Plant

Oil Sludge Pyrolysis Plant

Key Advantages of Oil Sludge Pyrolysis Plant

More and more customers choose our Jinzhen company's oil sludge pyrolysis machine, because we are the top oil sludge pyrolysis machine manufacturer in the market, and we have more than 17 years of experience in this pyrolysis machine. Besides, our oil sludge pyrolysis have below advantages worthy of your choice:
1.
High output yield, according to our customers' running condition, the final residue's oil content can be 0.1‰;
2.
Low energy consumption, after the pyrolysis process, the combustible gas can be recycled for heating the pyrolysis reactor. This can save on running costs.
3.
Our oil sludge pyrolysis plant has many devices, such as pressure & temperature monitoring, to check whether the machine is in a normal condition or not. Besides, there is an explosion-proof system to strengthen the safety of the machine.
4.
You can find A waste gas recycling system in our oil sludge pyrolysis plant. This system can collect the combustible gas for second use, saving the running cost and being very environmentally friendly.
In addition, this machine has a dedusting system to purify the smoke(when heating the pyrolysis reactor). This can make emission compliance

Technical Specifications
Model JZLY-8T JZLY-10T JZLY-12T JZLY-15T
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch
Raw Materials Oil Sludge, Waste Tyre, Rubber
Reactor Size D2200*7500 D2600*7500 D2800*7500 D2800*8000
Pattern Horizontal & Rotary
Heating method Directly heating
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 8kw 10kw 12kw 15kw
Floor Area (L*W*H) 30*8*6m 30*8*6m 35*8*8m 35*8*8m
Operating Pressure Normal Pressure.
Cooling Method Water Cooling
Life Span 6-8 Years

To ensure the pyrolysis unit processes oil sludge safely and efficiently, the following factors must be addressed:

Pre-treatment and feed characteristics: Oil sludge varies significantly in terms of water content, solids content, and fluidity. Equipment capable of handling encapsulated solid or semi-fluid feedstocks is required; pre-dewatering or the addition of dry materials to adjust viscosity may be necessary to prevent coking and clogging.

Process selection: Oil sludge with high solids content and large particles is better suited for batch or slow-continuous pyrolysis furnaces equipped with dynamic sealing and wall-scraping systems, whereas fine, oil-laden soil/residue can be processed using indirectly heated rotary kiln pyrolysis.

Operation Mode

For our oil sludge pyrolysis plant, there are three kinds you can choose from: batch type, semi-continuous type, and fully continuous type.
Batch-type pyrolysis machine: you need to stop the machine when you finish one batch, then feed the oil sludge, heat the pyrolysis reactor, and start the second batch.
Fully continuous pyrolysis machine: This machine can run continuously for 24 hours without stopping, and you can achieve feeding at the same out put the pyrolysis oil.
Semi-continuous pyrolysis machine: this kind of pyrolysis machine is between the batch and the fully continuous pyrolysis machine.

If your daily capacity is small, such as 1-15tons, you can choose a batch type. If your daily capacity is above 20tons or 50tons, we suggest you choose the semi-continuous pyrolysis machine or the fully continuous pyrolysis machine.

Fully continuous pyrolysis machine

fully oil sludge pyrolysis plant

Installation & Layout

There are two installing style for the oil sludge pyrolysis plant. If your daily capacity is small, such as 1-5tons, we can design this machine with a skid-mounted, Skid-mounted design refers to free installation; the machine is fully installed before leaving our factory. After the machine reaches your running site, just connect the electronics, and it can run. Another installation style is On-site installation, which is suitable for large capacities, such as 8-15tons or above 15tons. When the oil sludge pyrolysis plant arrives at your running site, our engineers will go there to guide your workers to install this machine. As usual, after finishing installing this machine, our engineers will train your workers to run this machine properly. Then go back to our factory.

Skid-mounted

Oil Sludge Pyrolysis Plant

After-sales Service

1. Engineers available overseas
Our engineer will go to your running site for guiding installing the pyrolysis machine, making sure your oil sludge pyrolysis plant runs smoothly.
2. Commissioning & training
We have an after-sales group with more than 15 people, who are responsible for commissioning and training. They can supply the technical support in time when needed.
3. We supply spare parts to support lifelong.

 

Hot Tags: oil sludge pyrolysis plant, China oil sludge pyrolysis plant manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY