Home-Products- Conveyor Machine - Screw Conveyor-

Content

video

Screw conveyor

The rotating shaft of the Screw conveyor is welded with a screw blade.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

 Screw conveyor

Products Description

The Screw conveyor adopts the structure of a "U"-shaped machine groove, lower screw assembly, and fixed installation. The U-shaped groove is connected by segmented flanges, which is easy to replace and maintain the inner bushing. The U-shaped screw conveyor is suitable for horizontal or small inclination conveying, and the inclination angle does not exceed 25°. It can be fed or discharged at a single point, and can also be fed or discharged at multiple points. It is suitable for occasions with large amounts of dust and environmental requirements. Great advantage. In addition. The upper part of the conveyor is equipped with a rain-proof cover, which has good sealing performance. The conveying process is basically a closed transportation system, which can effectively reduce the leakage of indoor odors or the entry of external dust.

Screw conveyor

Technical Parameters

Model

Length (m)

Capacity t/h

Speed (min)

Reducer

Motor

Weight (kg)

Model

speed ratio

Power (kw)

U 200

-10

9

60

ZQ250

23.34

1.1

726

U 200

-20

9

60

ZQ250

23.34

1.5

1258

U 250

-10

15.6

60

ZQ250

23.34

2.2

960

U 250

-20

15.6

60

ZQ250

23.34

3

1750

U 300

-10

21.2

60

ZQ350

23.34

3

1373

U 300

-20

21.2

60

ZQ350

23.34

4

2346

U 400

-10

51

60

ZQ400

23.34

5.5

1911

U 400

-20

51

60

ZQ500

23.34

11

2049

U 500

-10

87.5

60

ZQ400

23.34

7.5

2381

U 500

-20

87.5

60

ZQ650

23.34

18.5

5389

U 600

-10

134.2

45

ZQ750

23.34

22

3880

U 600

-10

134.2

45

ZQ850

23.34

55

7090

U-shaped screw conveyors are classified according to the driving mode

1. When the length of the U-shaped screw conveyor is less than 35m, it is a single-axis drive screw.

2. When the length of the U-shaped screw conveyor is greater than 35m, it is a double-shaft driving screw.

Features

1. Simple structure, small cross-sectional size, and good sealing performance

2. Low manufacturing cost, convenient for intermediate loading and unloading

3. The conveying direction can be reversed, and it can also be conveyed in opposite directions at the same time

4. During the conveying process, the materials can also be stirred, mixed, heated, and cooled.

5. The material flow can be adjusted through the loading and unloading gate

scew conveyor

Screw conveyor

The part of the screw conveyor

Screw conveyor

 

Screw conveyor is mainly composed of a driving device, a head assembly, casing, a shaftless spiral body, a tank lining plate, a feeding port, a discharging port, a machine cover (when necessary), a base, and so on.
1. Driving device: A cycloidal pinwheel reducer or shaft-mounted hard-tooth surface gear reducer is used. In the design, the driving device should be set at the end of the discharge port as much as possible, so that the spiral body is in a tension state during operation.
2. The head is equipped with a thrust bearing, which can bear the axial force generated when conveying materials.
3. Spiral blade: the general material is stainless steel or carbon steel. Considering the service life, it is recommended to use spiral conveyor blades made of high-strength wear-resistant steel.
4. Chassis: It is a "U"-shaped groove, with a rain-proof cover on the upper part, and the material is stainless steel, carbon steel, or glass fiber reinforced plastic.
5. The tank lining board is made of high-strength engineering plastic polymer polyethylene, which has weak adsorption, non-stick material, wear resistance, and corrosion resistance.
6. Inlet and outlet: There are two kinds of square and round. Generally, the form of the inlet and outlet is determined by the user.

Application of the screw conveyor

Screw conveyor

The U-shaped screw conveyor is suitable for conveying powder, granular, and small block materials with a small inclination and a small range. It is widely used in food, chemical, building materials, metallurgy, mining, electric power, and other departments. The following are several common applications. :

Sewage treatment plant: It can be used in a sewage treatment plant to transport solid debris, such as coarse and fine grid cleaning machine slag, and sludge cake from the sludge dewatering machine.

Waste treatment plant: kitchen waste or domestic waste generated by household kitchens, restaurants, canteens, markets, and other industries. Stainless steel material can prevent damage to the machine due to corrosive materials.

Industrial waste treatment: such as boiler coal loading system, solid waste incineration, etc.

Cement batching plant: It is used for conveying powder materials such as cement and fly ash. During the conveying process, it can also realize the purpose of mixing and stirring the materials to prevent the concrete from agglomerating.

details display

 

Screw conveyor

Instructions for selection

 

1. Conveying material: powdery dry material, the specific gravity is not easy to be too heavy.

2. Installation angle: 0-15°

3. Conveying length: the larger the inclination angle is, the shorter the conveying length should be too long.

4. Motor power: Determine the motor power to be selected according to the conveying length, inclination angle, conveying volume, etc., and choose a large one or a small one.

5. Spiral speed: according to the specification, model, and the inclination angle, the U-shaped screw conveyor speed is selected. The larger the inclination angle, the faster the speed.

In addition to regular models, our U-shaped screw conveyors also support model customization.

Installation of Jiaolong conveyor

1. The on-site installation of the inlet and outlet should make the flange support surface of the inlet and outlet parallel to the axis of the screw machine body, and the flanges connected should be tightly fitted without gaps.

2. After installation, check whether the reducer is full of lubricating oil, and then carry out a no-load test run. After more than half an hour of continuous test run, check the screw machine assembly.

3. The connection between the flanges of the casing should be smooth and bridged, and the dislocation deviation on the inner surface of the casing should be less than or equal to 2mm.

4. The middle hanging shoe bearing of the U-shaped screw conveyor should be reliably fixed on the lifting lug of the casing, and the screw rotates evenly after connecting with the adjacent screw, and must not be stuck. During installation, an adjustment shim can be added between the suspension bearing base and the casing lifting lug to ensure that each suspension bearing is coaxial, and the coaxiality of the spiral body axis after installation is specified.

Screw conveyor

Precautions for operation

1. Before starting the auger conveyor, carefully check whether there is any remaining dust and debris in the machine groove.

2. The feeding must be uniform;

3. A screen should be added to the feed port of the auger conveyor.

4. The machine slot and the machine slot cover must be careful.

5. Before shutting down, the materials in the machine should be unloaded as much as possible;

6. When the machine stops in the middle of the operation, the materials in the machine should be unloaded as much as possible, and if the materials in the machine cannot be discharged in time;

7. Regularly check the wear of the spiral blades.

8. Each lubricating part of the conveyor should be lubricated in strict accordance with the requirements.

9. When making harsh noises, it should be checked in time.

10. The bearings at both ends of the auger conveyor should be strictly sealed.

11. Pay close attention to monitor the temperature exceeding the allowable temperature.

Success case

 

Screw conveyor

 

 

 

 

 

 

 

Hot Tags: screw conveyor, China screw conveyor manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY