Domestic Waste Plastic Crusher

Domestic Waste Plastic Crusher

A Domestic Waste Plastic Crusher is a piece of equipment suitable for the initial crushing of raw materials. It is commonly used for the coarse crushing of raw materials or recycled scraps, playing a crucial role in the field of resource recycling.

High adaptability: It can handle materials of various sizes, such as rolls of plastic film, large tires, metal drums, and wooden pallets. Controllable output: By adjusting the blade gap or changing the screen size, uniform and clean fragments can be obtained.
Smooth operation: Low speed and high torque result in low vibration, low noise, and low dust.

1. The Domestic Waste Plastic Crusher has the characteristics of strong crushing ability, low noise, environmental- friendly.

2. The shredder has a big feeding mouth. So the materials could be fed into the crushing cavity freely.

3. The motor is connected with the shaft, which can avoid belt slipping and prevent the easy-wear part from breaking.

4. The shredder machine is controlled by an electrical control system that could protect the machine from damage.

4, Compact structure. The motor is directly connected to the shaft roller, which can avoid slipping and spare parts from breaking.

5, The spare parts are made of high manganese steel, which is of high Resistance and prolonged service life.

(1) Containers: plastic beverage cans, plastic barrels, packaging boxes, packaging barrels

(2) Waste home appliances: TV sets, washing machines, refrigerator shells

(3) Pipes: large pipes, pipes, polyethylene pipes

(4) Waste formwork: wooden pallets, plastic pallets, pallet trucks

(5) Waste tires: car tires, truck tires, motorcycles, bicycles

(6) Scrap metal: aluminum alloy casing, automobile, scrap aluminum casting, steel, lead, and engine casing

(7) Kitchen waste, medical waste, biological waste, garden waste

(8) Rubber materials, paper machine head ropes, scraps from rubber factories

(9) When discarding cables, not only can the cables be crushed into small pieces, but also the copper inside can be taken out.

Cutter diameter	Type	Power (KW)	Output (kg/h)	Shear knife Number	Feed opening (mm)
Ø200x20	500	7.5	300-800	16	680*760
	600	11	400-1000	24	840*760
	800	22	600-1200	32	1000*760
Ø300x40	800	15*2	800-2000	16	1010*990
	1000	18.5*2	1000-3000	20	1170*990
	1200	22*2	1500-3500	26	1410*990
	1400	30*2	1800-4000	30	1590*990
	XL1400	37-45*2	1800-4000	30	1590*990
	1500	37-45*2	2000-5500	36	1890*990
	XL1500	37-55*2	2000-5500	36	1890*990
Ø400x40	1000	22-30*2	1500-4000	20	1230*1200
	1200	30-37*2	2000-5000	26	1470*1200
	1400	37-45*2	2500-6000	30	1600*1200
	XL1400	45-75*2	2500-6000	30	1600*1200
	1500	37-75*2	2200-7000	36	1950*1200
	XL1500	55-75*2	2200-7000	36	1950*1200
Ø600x50	1500	37-55*2	3000-12000	30	1900*1450
	2000	45-75*2	4000-18000	40	2500*1450
	2500	55-110*2	5000-22000	50	3000*1450
Ø800x80	2500	75-95*2	4500-20000	30	3000*1650
	3000	75-132*2	6000-30000	36	3500*1650
	4000	132*2	8000-40000	50	4500*1800

 

1. The connection parts of the motor, reducer, hydraulic coupling, nose, tail, and other parts must be complete, intact, and fastened. There should be no oil leakage or oil leakage in the reducer and hydraulic shaft joints, and the oil quantity should be appropriate.

2. The signal must be sensitive and reliable; no signal is allowed to start. The spray sprinkler should be in good condition.

3. The power cables and operation wires must be hung neatly without being squeezed.

4. Coal, gangue, sundries, motor, and reducer coal dust near the machine head must be cleaned up.

5. The overlap between the head of the scraping conveyor and the tail of the loader should be appropriate.

6. The scraper chain plate must be moderately tight, and the scraper and screws must be fully tightened.

7. The traveling trolley of the loader must be stable and reliable;

8. When the transponder is turned on under the partial condition of the axle body, there should be no abnormal sound in the operation of each part, and the scraper, chain, and connecting ring should be free from twisting, bending, and bending.

9. The roadway support at the crusher and the crusher must be intact and firm.

10. The safety protection net and protection device of the pulverizer shall ensure that it is not deformed, does not fail, and is safe and reliable;

11. The roadway support at the loader and pulverizer must be intact and firm.

 

Hot Tags: domestic waste plastic crusher, China domestic waste plastic crusher manufacturers, suppliers, factory