Plastic Bag Crusher Machine

 

 

The Plastic Bag Crusher Machine adopts the double shaft independent drive, so that the materials are pressed accordingly during production to achieve the automatic feeding function. The unique cutter shaft structure and four corner rotary cutter will not entangle the shaft or jam the equipment in the production process of low speed and high torque, so as to improve the production efficiency. The equipment is suitable for the crushing of various materials with high toughness and viscosity. It has many advantages in production, environmental protection, recycling and so on.

Plastic Bag Crusher Machine can be used for recycling and crushing of waste agricultural film, packaging film, ton bag, greenhouse film, space bag, food bag, cement bag, waste fishing net and other raw materials; Example: provide the most ideal solution for continuous crushing production of woven bags. In this processing process, the waste woven bags are directly sent to the new double shaft shredder by conveyor belt. The whole bundle of woven bags are torn by N moving knives installed on the main shaft and fixed knives installed on the frame. The woven bags are separated from sundries through the separation tank to reach the recyclable raw materials.

 

 

Model	JL-2600	JL-1900	JL-1500	JL-1200	JL-1000	JL-600
Spindle power (kw)	4-160*2	4-90*2	4-45*2	4-37*2	4-30*2	4-15*2
Spindle speed(r/min)	16-18	14-16	14-16	18-20	18-20	18-20
Capacity(t/h)	25-60	10-25	8-18	6-15	5-10	2-5
Conveyor power(kw)	4-3kw	4-3kw	4-3kw	/	/	/
Number of cutter heads (pieces)	40	40	30	28	30	26
	Different materials, different number of knives and blades, can be customized
Cutter diameter(mm)	Φ720	Φ560	Φ530	Φ372	Φ360	Φ260
Crushing particle size(cm)	3-10	3-10	3-10	3-10	3-10	3-10
Silo size(mm)	2425*1400	2300*200	2000*2000	1400*1000	1200*1000	820*900
Dimensions(mm)	8200*4000*4300	8000*2500*2400	4000*1700*2400	3200*2000*1900	3000*2000*1900	2600*2000*1900
Weight(t)	36	15	12	6	5	2.5

 

 

 

1. Time saving: recover immediately within 30 seconds without waiting for centralized crushing, and be sure to be clean and clean;

2. Improve the quality: after being taken out at high temperature, the material will suffer oxidation, humidification (absorbing water) and damage the physical properties. Immediate recovery within 30 seconds can reduce the physical strength and the damage of color luster

3. Saving money: Recycling in a short time to avoid pollution and the bad rate caused by mixing can reduce the waste and loss of plastic, labor, management, storage and material purchase funds;

4. Wide application: suitable for crushing and recycling Pu, PVC, PC, ABC and other soft and hard materials;

5. Simplicity: easy to disassemble design, easy to change color and material, compact and occupy less space;

6. Adopt medium speed motor, low noise and low energy consumption; The motor is equipped with overload protection device and power interlock protection system, which makes the operation and cleaning safe and reliable;

 

 

1. The connection parts of the motor, reducer, hydraulic coupling, nose, tail and other parts must be complete, intact and fastened. There should be no oil leakage or oil leakage in the reducer and hydraulic shaft joints, and the oil quantity should be appropriate.

2, The signal must be sensitive and reliable, no signal is not allowed to start. The spray sprinkler should be in good condition.

3. The power cables and operation wires must be hung neatly without being squeezed;

4. Coal, gangue, sundries, motor and reducer coal dust near the machine head must be cleaned up;

5. The overlap between the head of the scraping conveyor and the tail of the loader should be appropriate;

6. The scraper chain plate must be moderately tight, and the scraper and screws must be fully tightened;

7. The traveling trolley of the loader must be stable and reliable;

8. When the transponder is turned on under the partial condition of the axle body, there should be no abnormal sound in the operation of each part, and the scraper, chain and connecting ring should be free from twisting, twisting and bending;

9. The roadway support at the crusher and the crusher must be intact and firm.

10. The safety protection net and protection device of the pulverizer shall ensure that it is not deformed, does not fail, and is safe and reliable;

11. The roadway support at the loader and pulverizer must be intact and firm.

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• Assign special after-sales service personnel to guide customers to install and debug equipment on site
• On-site training of operators
• Complete the commissioning and operation of the complete set of equipment
• During the operation of the equipment, if any problems are encountered, there is a 24-hour online service, and remote guidance to solve the problem.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, all kinds of crushing machines. our company by eputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will depelope us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: When we establish one kind of shredder machine, can we use it to shred other materials?

A: Yes, you can. We will design the shredder machine for you as per your materials.

 

Q: How to choose a suitable shredder?

A: Please tell us your raw material and what capacity you need, we will recommend you the most suitable shredder.

 

Q: What About The Machine Installation?

A: For the Waste Tire Shredder / Rubber Crusher / Old Tire Recycling Machine installation, we will provide you the wire connection drawing and technical support, normally you can finish by yourself; but if you really need our technician, we will send technician to your working site as required.

 

Q: How About The Spare Parts?

A: We provide spare parts at cost price permanently and will give you the spare parts list when you purchase machine.

 

Q: Will you test the shredder machine before delivery?

A: Yes, we will test every machine and production line before delivery and send you the working video. You also can come to us for inspection before delivery.

 

 

If you are interesting in Plastic Bag Crusher Machine , please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: plastic bag crusher machine, China plastic bag crusher machine manufacturers, suppliers, factory