A shafted screw conveyor is a machine that uses a motor to drive a screw to rotate and push materials to achieve the purpose of conveying. It can be transported horizontally, obliquely, or vertically, and has the advantages of simple structure, small cross-sectional area, good sealing, convenient operation, easy maintenance, and convenient closed transportation. In terms of conveying form, screw conveyors are divided into two types: shafted screw conveyors and shaftless screw conveyors. In terms of appearance, they are divided into U-shaped screw conveyors and tubular screw conveyors. The shaft screw conveyor is suitable for non-viscous dry powder materials and small granular materials. (For example: cement, fly ash, lime, grain, etc.) The shaftless screw conveyor is suitable for conveying viscous and easily entangled materials. (Example: sludge, biomass, garbage, etc.)

Features
1) The structure is relatively simple, and the cost is low.
2) Reliable work, easy maintenance and management.
3) Compact size, small section size and small footprint. It is easy to enter and exit hatches and carriages during unloading and unloading operations in ports.
4) It can realize sealed transportation, which is conducive to the transportation of easy-to-fly, hot and strong-smelling materials, which can reduce the pollution to the environment and improve the working conditions of port workers.
5) Easy to load and unload. The horizontal screw conveyor can be loaded and unloaded at any point on its conveying line; the configuration of the vertical screw conveyor can have excellent reclaiming performance compared to the screw reclaiming device.
6) It can be conveyed in the reverse direction, or one conveyor can convey materials in two directions at the same time, that is, to the center or away from the center.
7) The unit energy consumption is large.
8) The material is easy to be crushed and worn during the conveying process, and the wear of the spiral blade and the trough is also serious.
Technical Parameters
|
LS type |
100 |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
|
GX type |
|
|
200 |
250 |
300 |
400 |
500 |
|
|
|
|
|
Diameter(mm) |
100 |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
|
pitch(mm) |
100 |
160 |
200 |
250 |
315 |
355 |
400 |
450 |
500 |
560 |
630 |
|
speed(r/min) |
140 |
120 |
90 |
90 |
75 |
75 |
60 |
60 |
45 |
35 |
30 |
|
Capacity QΦ=0.33(m³/h) |
2.2 |
7.6 |
11 |
22 |
36.4 |
66.1 |
93.1 |
160 |
223 |
304 |
458 |
|
Power Pd 1=10m(KW) |
1.1 |
1.5 |
2.2 |
2.4 |
3.2 |
5.1 |
4.1 |
8.6 |
12 |
16 |
24.4 |
|
Power Pd 1=30m(KW) |
1.6 |
2.8 |
3.2 |
5.3 |
8.4 |
11 |
15.3 |
25.9 |
36 |
48 |
73.3 |
|
speed(r/min) |
120 |
90 |
75 |
75 |
60 |
60 |
45 |
45 |
35 |
30 |
20 |
|
Capacity QΦ=0.33(m³/h) |
1.9 |
5.7 |
18 |
18 |
29.1 |
52.9 |
69.8 |
125 |
174 |
261 |
305 |
|
Power Pd 1=10m(KW) |
1.0 |
1.3 |
2.1 |
2.1 |
2.9 |
4.1 |
4.7 |
6.8 |
9.4 |
14.1 |
16.5 |
|
Power Pd 1=30m(KW) |
1.5 |
2.3 |
4.5 |
4.5 |
7 |
8.9 |
11.6 |
20.4 |
28.3 |
42.2 |
49.5 |
|
speed(r/min) |
90 |
75 |
60 |
60 |
45 |
45 |
35 |
35 |
30 |
20 |
16 |
|
Capacity QΦ=0.33(m³/h) |
1.4 |
4.8 |
15 |
15 |
21.8 |
39.6 |
54.3 |
97 |
149 |
174 |
244 |
|
Power Pd 1=10m(KW) |
0.9 |
1.2 |
1.9 |
1.9 |
2.5 |
3.4 |
4.3 |
5.4 |
8.1 |
9.5 |
13.3 |
|
Power Pd 1=30m(KW) |
1.2 |
2.2 |
3.8 |
3.8 |
5.4 |
6.8 |
9.2 |
16 |
24.4 |
28.6 |
39.9 |
|
speed(r/min) |
75 |
60 |
45 |
45 |
35 |
35 |
30 |
30 |
20 |
16 |
13 |
|
Capacity QΦ=0.33(m³/h) |
1.2 |
3.8 |
11 |
11 |
17 |
31.7 |
46.5 |
73.0 |
99.3 |
139 |
199 |
|
Power Pd 1=10m(KW) |
0.75 |
1.1 |
1.6 |
1.6 |
2.1 |
3.1 |
3.7 |
4.6 |
5.7 |
7.7 |
11 |
|
Power Pd 1=30m(KW) |
1.1 |
1.8 |
3.4 |
3.4 |
4.4 |
5.6 |
8 |
14 |
16.7 |
23.2 |
33 |
1. GX type: There are seven specifications of screw diameters, including 150, 200, 250, 300, 400, 500, 600mm. Corresponding conveying system for one-way conveying with horizontal or inclination angle less than 20°.
2. LS type: LS type Luo Xuoh press conveyor is a replacement product of GX type Shafted screw conveyor. The screw diameter is 100- 1250 mm; there are eleven specifications, and the driving mode has two forms of single-end drive and double-end drive. The length of the LS type screw feeder is every 0.5m, and the corresponding conveying system can be formed according to different site needs. Like the GX type Shafted screw conveyor, it is used for one-way conveying with a horizontal or inclination angle less than 20°.
The Structure

The shafted screw conveyor is mainly composed of a driving device, head assembly, casing, shaftless spiral body, tank lining plate, feeding port, discharging port, machine cover (when necessary), base, and so on.
1. Driving device: A cycloidal pinwheel reducer or a shaft-mounted hard-tooth surface gear reducer is used. In the design, the driving device should be set at the end of the discharge port as much as possible, so that the screw body is in a tension state during operation.
2. The head is equipped with a thrust bearing, which can bear the axial force generated when conveying materials.
3. Chassis: The chassis is U-shaped or O-shaped, with a rain-proof cover on the upper part, and the material is stainless steel, carbon steel, or glass fiber reinforced plastic.
4. Shaftless spiral body: the material is stainless steel or carbon steel.
5. Tank lining board: the material is wear-resistant plastic plate, rubber plate, or cast stone plate, etc.
6. Inlet and outlet: There are two kinds of square and round. Generally, the form of the inlet and outlet is determined by the user.
How it Works?
A motor-driven gearbox rotates the central shaft. The helical flights, acting as a continuous inclined plane, push the material forward through the trough. The centrally located shaft provides rigid support, allowing for precise control over flight diameter, pitch, and rotation speed. In a double-shafted configuration, two synchronized shafts counter-rotate. Their flights intermesh, creating a continuous shearing and scraping action that breaks up material clumps and prevents build-up on the flights, ensuring a steady and unobstructed material flow.
Application of the screw conveyor
The shafted screw conveyor's sealed design and controllable flow make it essential for handling materials from fine, dusty powders to abrasive granules:
Cement & Building Materials: Metering cement, fly ash, and silica fume to mixers.
Agriculture & Animal Feed: Conveying grains, oilseeds, corn meal, and feed supplements.
Chemical & Mineral Processing: Handling soda ash, fertilizers, plastic pellets, and mined ore fines.
Food & Beverage: Moving sugar, flour, malted barley, and coffee beans in a dust-tight environment.
Environmental & Wastewater: Our Double Shafted models excel here, reliably conveying dewatered municipal sludge, biosolids, and industrial filter cakes without binding.

Different feeding methods

Several common conveying methods
According to the working conditions on site, the conveying methods of the Shafted screw conveyor are as follows. In special cases, please contact our sales staff to make the most suitable solution. When choosing a deep Shafted screw conveyor, please note the following:

details display

FAQ
Q: Are you a factory or a trading company?
A: We are a factory, established in 2007, specializing in the manufacture of spiral vibration vertical elevator, slat feeder, Shafted screw conveyor, slat conveyor, Shafted screw conveyor, large angle Shafted screw conveyor, Shafted screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, and so on.
Q: How about spare parts?
A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.
Q: Will you test the machine before delivery?
A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.
Q: Can this Shafted screw conveyor be conveyed vertically?
A: We have vertical Shafted screw conveyors and bucket elevators. According to material characteristics and conveying height, we can choose the most suitable conveying or lifting equipment.
Q: Can the Shafted screw conveyor cool the material?
A: Yes, you can choose a water-cooled Shafted screw conveyor.
Q: Can the Shafted screw conveyor have multiple inlets or outlets?
A: Yes, when feeding at multiple feed points at the same time, please pay attention to uniform feeding and control the feeding amount.
Purchase Notice
1. Please provide material name, specific gravity, particle size, etc
2. Are there other characteristics, such as viscosity, temperature, corrosivity, etc?
3. Conveying length: horizontal conveying or inclined conveying?
4. Conveying capacity/hour
Hot Tags: shafted screw conveyor, China shafted screw conveyor manufacturers, suppliers, factory











