Semi-continuous Waste tyre pyrolysis machine
Products Description of Semi-continuous Waste tyre pyrolysis machine
Semi-continuous Waste tyre pyrolysis machine and Batch type pyrolysis machine are very similar. The difference lies in the different feeding methods. To put it simply, it is the difference between opening the furnace door for feeding and not opening the furnace door. In the Batch type waste plastic pyrolysis process, if the furnace door is to be opened, it must meet the requirements, otherwise it will cause production safety problems. The furnace door of the batch type pyrolysis machine must be cooled to the required temperature. Without cooling, the high-temperature slag is very dangerous when it encounters air. Natural cooling in a closed space takes a long time.
Before pyrolysising the plastic, the semi-continuous pyrolysis equipment dries the plastic first. The semi-continuous feeding adopts the method of spiral feeding + feeding ball valve, which can be fed without opening the furnace door. When the plastic in the pyrolysis furnace is melted, secondary feeding can be carried out. When the plastic pyrolysis of the pyrolysis furnace is completed, the rear slag is also used. When the slag is completed, the ball valve can be opened for spiral feeding. After the feeding is completed, the ball valve is closed, and the next pyrolysis process can be started. The pyrolysis reactor does not need to be cooled, which reduces the running time. Semi-continuous equipment takes an intermediate value in terms of labor intensity, working environment and production efficiency.
suitable raw material for using semi-continuous pyrolysis machine

Pulp materials: raw materials containing plastics such as domestic garbage and industrial waste.
Rubber materials: raw materials containing rubber such as waste tires, waste soles, and waste circuit boards.
Oil sludge: ground oil sludge, oil field oil sludge, bilge oil sludge, tank bottom oil sludge, etc.
Process flow chart of the semi-continuous pyrolysis machine

Technical indicators of the semi-continuous waste tyre pyrolysis machine
|
Name |
item |
|
Model |
Continuous type waste tyre pyrolsysis machine(15T) |
|
suitable raw material |
waste plastic,waste tyre,waste rubber,waste oil sludge |
|
process method |
loading the raw materil without opening the door |
|
max capacity/day |
15tons/day |
|
operate method |
semi-continuous,each week or each month open one time input door |
| Control method | Operation table |
|
heating method |
oil,gas,electricity |
|
cooling method |
water cooling |
|
running temperature |
300℃-400℃ |
|
Working pressure |
≦0.01MPa |
| Water consumption | 100KG/day (natural evaporation) |
| Labor demand (per shift) |
1-3 person |
| Floor space requirements |
200㎡ |
Feaure of semi-continuous type pyrolysis machine
1. The equipment developed by our company can feed plastics twice, with more loading, high oil yield and good oil quality.
2. After the loading becomes liquid, it can exceed the center line, and the loading rate is 80%.
3. The slag discharge time is short, and the slag discharge is closed, which will not cause air pollution.
4. The main furnace does not need to be completely cooled before the next feeding.
5. After special treatment, the main cracking kettle will not stick to the furnace wall during production.
6. For the waste gas generated during the production process, it can be recycled and burned using exclusive equipment.
7. The semi-continuous waste tire refining equipment puts the raw materials into a closed cracking furnace for heating and cracking reaction, which is environmentally friendly and reduces the labor intensity of workers.
Pyrolysis products (for reference only)
|
|
Pyrolysis oil It can directly replace fuel oil for industrial or boiler heating, such as cement plants, steel plants, glass plants, etc. 2. It can be refined into diesel for diesel fuel and power plants, agricultural machinery, etc. Note: The oil directly cracked from tires is crude oil, which can be used directly as industrial fuel. If you need to refine diesel, you need another set of refining equipment.
|
|
|
Carbon black It can be pressed into pellets and burned for industrial heating. Its calorific value is equivalent to that of coal and can directly replace coal. 2. Toner can be refined into different standards and used as an additive for paint pigments, rubber products, etc.
|
|
Non-condensable combustible gas 1. It can be used as fuel through a gas spray gun. 2. Excess exhaust gas can be stored through a storage system. |
workshop of semi-continuous type pyrolysis machine
success case

Company Strength
|
|
|
|
|
If you are interested in this type pyrolysis machine,welcome to inquiry us for a free quotation.
Hot Tags: semi-continuous waste tyre pyrolysis machine, China semi-continuous waste tyre pyrolysis machine manufacturers, suppliers, factory
















