Working Principle Of Low Nitrogen Burner
What is a low nitrogen burner? When burning at high temperature, nitrogen and oxygen in the air will combine in various ways to form nitrogen oxides, which will pollute the air and cause harm to the human body. Low nitrogen burner can reduce oxygen concentration and flame temperature, thus improving safety and environmental protection. Generally, low nitrogen burner refers to the burner with NOx emission of about 30~80 mg. The NOx emission below 30mg is often referred to as ultra-low nitrogen burner.
Features
1. The air and combustion layout is reasonable and clear, which is convenient for operation.
2. Compact structure. The low nitrogen burner uses an integrated design, which makes the overall layout more compact.
3. It is easy to install and maintain.
4. Low pollution and high efficiency. The burner adopts electric damper, which can fully and evenly mix methanol combustion and combustion supporting air.
5. Good flame stability. Tributary air distribution and swirling flow are adopted.
Technical Parameter
|
Model |
ODF-1.4-FGR |
ODF-2.1-FGR |
|
Customize |
YES |
YES |
|
Fuel |
Fuel, natural gas, liquefied gas, city gas |
|
|
Input power |
7.5KW |
7.5KW |
|
Output power |
500-1400KW/H |
700-2100KW/H |
|
Air supply pressure |
4-6pa |
7-13pa |
|
Fuel Consumption |
50-140M3/h |
70-210M3/h |
|
Voltage |
380V/3/50HZ |
380V/3/50HZ |
Application Range
1. Applicable to all kinds of boilers: such as garment factories, restaurants, hotels, bath centers, etc.
2. Applied to powder spray drying production line,
3. Applied in zinc-aluminum alloy die-casting industry
4. It is used in various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow blower, garbage incinerator, hot air generator and various general boilers.
5. Suitable for waste tire cracking equipment, waste oil distillation equipment, refining equipment, waste plastic pyrolysis equipment,

When the low nitrogen burner burns under normal operation, it suddenly extinguishes the fire. The common fault causes are:
1. Extinguish fire after flame fluctuation caused by unstable air source. Treatment method: adjust the pressure and restart.
2. The flame detector of the combustor is in fault, the flame detection probe is grounded during operation, or the normal flame cannot be detected when it is too dirty, resulting in flameout. Treatment method: adjust the probe position and clean the probe surface. Restart.
3. Circuit fault The power supply is unstable or lacks phase, resulting in flameout in the process. Handling method: contact electrician to check power supply and wiring
Gas Boiler Burner Ignition Rod Does Not Ignite
Reasons:
- There is carbon residue in the gap of the ignition rod, and there is oil pollution.
- The ignition rod is broken. damp. Leakage.
- The distance between the ignition rods is wrong, too long or short.
- The insulating sheath of the ignition rod is damaged and shorted to ground.
- Ignition cable and transformer failure: cable disconnection, connector damage caused short circuit during ignition; transformer disconnection or other failures.
There are five treatment measures as follows:
①Clear, ②Renew, ③Adjust distance, ④Change line, ⑤Change transformer.
Warehouse

Our Guarantees And Services

Pre sale service:
- Guide customers to select the appropriate equipment model.
- Design reasonable processes and solutions for customers.
- Design and manufacture products according to customers' special needs to meet customers' different needs
Sales service:
- Strictly check the products before delivery
- Delivery according to the contract
After-sale service:
- The warranty period is one year (except for faults or damages caused by human factors, fuel factors or irresistible natural phenomena, as well as wearing parts not covered by the warranty: fuel injectors, pump heads, photo eyes, etc.).
- If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
- Please reply within 2 hours after receiving the warranty notice. 24-hour technical guidance to solve problems.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, Low Nitrogen Burners, pulverized coal burner, biomass burner, Low Nitrogen Burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!
FAQ
Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?
A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, Low Nitrogen Burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.
Q: Can heavy oil burners use light diesel as fuel?
Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.
Q: How to choose the right burner?
A: According to the required heat, fuel, boiler size and other parameters.
Q: How is the machine installation?
A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.
Q: What about spare parts?
A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.
Q: Will you test the Low Nitrogen Burner before delivery?
A: Yes, we will test each Low Nitrogen Burner before shipment and send you the working video. You can also contact us before delivery.
Q: Can I be an agent of the burner in our area?
A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

If you are interesting in Low Nitrogen Burner, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: low nitrogen burner, China low nitrogen burner manufacturers, suppliers, factory











