Working Principle Of Industrial Waste Gas Burners
Driven by the motor, the oil pump sucks the light oil (diesel oil) and sends the fuel with working pressure of 10-12kg to the fuel injection nozzle for atomization. After mixing with the primary air, it is ignited by high-voltage electric spark to produce flame Through the action of flame disc (smoke stabilizing disc), it is mixed with secondary air again to form a rotating and stable combustion flame.
Suitable for large and medium-sized oil refining equipment, distillation equipment, waste tire cracking equipment, waste plastic processing equipment, steam boilers, heating furnaces, hot blast stoves, spraying equipment, drying equipment, heat treatment equipment and other thermal energy equipment.
Features
(1). Wide range of raw materials and low cost. The raw materials for preparing fuel are available in chemical plants, fertilizer plants and chemical markets all over the country. There is no shortage of sources, and the supply is guaranteed, unlike diesel and liquefied gas, once the tension is tight, the price will skyrocket, making it extremely difficult to purchase.
(2). The new alcohol-based fuel prepared by our company's production technology has a calorific value as high as 6000-7000 kcal/kg, which is equivalent to the calorific value of petroleum liquefied gas, and the cost is only one third of the wholesale price of petroleum liquefied gas or diesel It can save a lot of fuel costs for customers such as canteens and hotels.
(3). It is clean and hygienic and protects the environment. The fuel has high oxygen content, sufficient combustion, no black smoke, no carbon deposits, no black bottom of the pot, and no residue. The exhaust gas emission after combustion is more than 80% lower than that of liquefied petroleum gas. It is a veritable clean fuel.
(4). Safe and reliable, wide application range. The fuel can be stored, transported and used under normal temperature and pressure. It does not require high-pressure steel cylinders. It can be stored in ordinary iron or plastic drums. It is convenient to use and can be extinguished with water in case of fire. Gas leakage caused gas poisoning. It can be used as an alternative to liquefied gas for thousands of households, or as an alternative to diesel fuel for canteens in hotels, hotels, kitchens, schools, institutions, etc., and can be used as an industrial fuel instead of part of the fuel diesel.
Technical Parameter
|
Model |
200,000 kcal methanol burner |
300,000 kcal methanol burner |
600,000 kcal methanol burner |
1.2 million kcal methanol burner |
1.8 million kcal methanol burner |
2.4 million kcal methanol burner |
|
Customize |
yes |
|||||
|
Fuel |
Methanol, light diesel oil |
|||||
|
Calorific Value |
20wka |
30wka |
60wka |
120wka |
180wka |
240wka |
|
Air supply pressure |
4-6pa |
4-6pa |
5-10pa |
6-12pa |
7-13pa |
7-13pa |
|
Fuel Consumption |
10kg/h |
15kg/h |
30kg/h |
45kg/h |
60kg/h |
70kg/h |
|
Size |
480mm |
620mm |
1100mm |
1200mm |
1300mm |
1500mm |
|
Weight |
0.01t |
0.025t |
0.04t |
0.05t |
0.07t |
0.09t |
|
Scope of use |
large and medium-sized steam boilers, heating furnaces, hot blast stoves, spraying equipment, drying equipment, heat treatment equipment |
|||||
|
Alias |
200,000 kcal |
300,000 kcal |
600,000 kcal |
1.2 million kcal |
1.8 million kcal |
2.4 million kcal |
|
Types |
Industrial Waste Gas Burners |
|||||
Application Range

1. Applicable to all kinds of boilers: such as garment factories, restaurants, hotels, bath centers, etc.
2. Applied to powder spray drying production line,
3. Applied in zinc-aluminum alloy die-casting industry
4. It is used in various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow blower, garbage incinerator, hot air generator and various general boilers.
5. Suitable for waste tire cracking equipment, waste oil distillation equipment, refining equipment, waste plastic pyrolysis equipment, etc.
Maintenance
·The light diesel oil used must be clean, please pay attention to cleaning the fuel tank and oil filter regularly.
· Under normal use conditions, replace the oil nozzle once a year, and replace the elastic coupling and the rubber parts on the coupling once a year and a half.
· It is strictly forbidden for foreign objects to enter the air duct.
· The burner should be kept away from flammable and explosive materials and equipped with fire extinguishing equipment.
· Adjust the oil pressure appropriately according to the oil pressure indication value.
· Regularly check the combustion cylinder, impeller, flame detector and ignition electrode to remove oil stains and carbon deposits. In particular, the flame detector should be kept clean and free from water.
· Always switch off the power supply when servicing the burner.
Gas Boiler Burner Ignition Rod Does Not Ignite
Reasons:
- There is carbon residue in the gap of the ignition rod, and there is oil pollution.
- The ignition rod is broken. damp. Leakage.
- The distance between the ignition rods is wrong, too long or short.
- The insulating sheath of the ignition rod is damaged and shorted to ground.
- Ignition cable and transformer failure: cable disconnection, connector damage caused short circuit during ignition; transformer disconnection or other failures.
There are five treatment measures as follows:
①Clear, ②Renew, ③Adjust distance, ④Change line, ⑤Change transformer.
Warehouse

Our Guarantees And Services

Pre sale service:
- Guide customers to select the appropriate equipment model.
- Design reasonable processes and solutions for customers.
- Design and manufacture products according to customers' special needs to meet customers' different needs
Sales service:
- Strictly check the products before delivery
- Delivery according to the contract
After-sale service:
- The warranty period is one year (except for faults or damages caused by human factors, fuel factors or irresistible natural phenomena, as well as wearing parts not covered by the warranty: fuel injectors, pump heads, photo eyes, etc.).
- If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
- Please reply within 2 hours after receiving the warranty notice. 24-hour technical guidance to solve problems.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, Light oil burners, pulverized coal burner, biomass burner, Light oil burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!
FAQ
Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?
A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, Light oil burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.
Q: Can heavy oil burners use light diesel as fuel?
Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.
Q: How to choose the right burner?
A: According to the required heat, fuel, boiler size and other parameters.
Q: How is the machine installation?
A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.
Q: What about spare parts?
A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.
Q: Will you test the Light oil burner before delivery?
A: Yes, we will test each Light oil burner before shipment and send you the working video. You can also contact us before delivery.
Q: Can I be an agent of the burner in our area?
A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

If you are interesting in Industrial Waste Gas Burners, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: industrial waste gas burners, China industrial waste gas burners manufacturers, suppliers, factory











