Tire To Oil Pyrolysis Industrial Burners

 

Tire to oil pyrolysis Industrial burners is widely used in cracking furnaces, waste tire pyrolysis plant, steam boilers, hot water boilers, thermal oil furnaces, coal-fired boilers, hot blast stoves, drying furnaces, kilns, ovens and other boilers that require heat sources.

The burner uses all flammable liquids as fuel for combustion, and adopts the second-stage fire control method. The maximum calorific value of the burner can reach 18 million kcal. Using the second-stage combustion control method, accurate air-fuel ratio, with protection functions such as power failure, low fuel pressure, and low air pressure. Equipped with special ion current and electronic eye detection module, ion current and electronic eye double flame detector, to achieve safe, efficient and reliable combustion.

 

 

 

• Special type for asphalt plant
• Low pressure medium atomization
• Good fuel adaptability
• Integrated main unit for easy movement and installation
• Electronic proportional adjustment
• Dual frequency conversion control technology

 

 

Model	ODF-30	ODF-40	ODF-60	ODF-80
Fuel	Methanol, light diesel oil, kerosene and other liquid fuels (heavy oil and waste oil fuels require heavy oil burners)
Air Pressure（MPa)	0.3
Size （mm）	630*650*380	1000*740*430	1030*740*430	1270*850*500
Protection class（IP）	45（The protection level can be increased according to the order requirements）
Air volume adjustment method	Manual damper adjustment	Automatic damper adjustment

 

 

1. When the equipment is parked, the liquid in the equipment should be drained.

2. Close all valves.

3. Thoroughly clean the surface of the equipment.

4. All rotating parts are coated with anti-grease.

5. Cover all the equipment with canvas to prevent dirt from depositing on the surface of the equipment.

 

 

1. Fuel oil storage conditions: thermal insulation

2. Pipeline transportation conditions: filtration, heat preservation, to ensure the fluidity of heavy oil

3. Preheat before entering the machine: ensure the fluidity of heavy oil

4. Insulation of combustion oil circuit: to ensure the fluidity of heavy oil

 

 

1. Applied to various boilers: such as garment factories, catering industries, etc.,

2. Applied to powder spray drying production line,

3. Applied to zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator and various general boilers.

 

 

 

 

 

 

Pre-sale service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On sale service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, tire pyrolysis plant, distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, Heavy oil burner, Industrial Oil Burner, diesel burner, methanol burner, pulverized coal burner, biomass burner, 300,000 Kcal Waste Oil Burners, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by reputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will develop us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

 

 

Q: Are you a factory or a trading company? When we use a burner, can we use it to burn other raw materials?

A: We are a factory, established in 2007, specializing in the production of heavy oil fuel engines, diesel burners, methanol burners, biomass burners and other burners. If you need to burn other raw materials, please select the corresponding burner.

 

Q: Can heavy oil burners use light diesel as fuel?

Answer: Yes, heavy oil burners can use light diesel as fuel; but light diesel burners should try not to use heavy oil as fuel, which will easily block the nozzle.

 

Q: How to choose the right burner?

A: According to the required heat, fuel, boiler size and other parameters.

 

Q: How is the machine installation?

A: For the installation of the burner, we will provide you with the wiring diagram and technical support. Generally, you can do it yourself; but if you really need our technicians, we will send them to your workplace as needed.

 

Q: What about spare parts?

A: We always provide spare parts at cost price and provide you with a spare parts list when you buy the machine.

 

Q: Will you test the Tire to oil pyrolysis Industrial burners before delivery?

A: Yes, we will test each Tire to oil pyrolysis Industrial burners before shipment and send you the working video. You can also contact us before delivery.

 

Q: Can I be an agent of the burner in our area?

A: Thank you for your trust. Please contact us for preliminary verification: First, whether there is already a local agent for the burner. Second, whether the agency conditions are met.

 

 

If you are interesting in Tire to oil pyrolysis Industrial burners, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: tire to oil pyrolysis industrial burners, China tire to oil pyrolysis industrial burners manufacturers, suppliers, factory