Inductions Of Waste Plastic Recycling Machine

Put the waste plastics into the cracking furnace, and turn on the heavy oil burner to heat the cracking furnace. When the temperature in the cracking furnace rises to a certain temperature, oil and gas will be generated, and the oil and gas will enter the gas distributor, sedimentation tank and condenser in turn along with the pipeline. The oil and gas from the reactor will be separated in the manifold. The heavy oil and gas will drop and be stored in the residue tank, while the light oil and gas will rise to the condenser. After cooling, the gas becomes liquid and flows into the tank. The remaining gas that cannot be liquefied will enter the water seal and then return to the burner for combustion.
Available Raw Material

|
Raw material |
Oil Yield |
|
PE |
50%-75% |
|
PP |
50%-75% |
|
PS |
50%-75% |
|
ABS |
40% |
|
Leftovers of paper |
Wet 15-20%, dry 60% |
|
House garbage |
35-50% |
|
Plastic cable |
80% |
|
Plastic bag |
50% |
|
Submarine cable |
75% |
|
Rubber cable |
35% |
|
Sole |
30% |
|
Big tires |
45-50% |
|
Small tires |
35-40% |
|
PVC |
Not available |
|
PET |
Not available |
Characteristics
♦ The rear slag discharge system has stable carbon black emission and low failure rate.
♦ Rotating operation to ensure high-efficiency and energy-saving heating.
♦ Using automatic feeding, convenient feeding
♦ Water tank cooling and tube condenser cooling have good cooling effect.
♦ European Union Standard
♦ Energy saving & energy recovery and reuse design
Process
Put the waste plastics into the cracking furnace and heat the cracking furnace with a heavy oil burner. The oil and gas enter the gas drum, then into the overhead tube cooling, and then into the box cooling. After "s" cooling, the plastic oil is input into the oil tank. The non condensable gas enters the furnace through the safety water seal for combustion.

End Product
|
NO |
Name |
Use |
|
1 |
Tyre oil |
(1) Can directly to sell (2) Can use our distillation equipment for gasoline and diesel (3) Can be used as a fuel |
|
2 |
Carbon black |
(1) Can directly to sell (2) Can use carbon black refining equipment to make fine carbon black (3) Can use the carbon black particle granulation equipment |
|
3 |
Scrap steel wire |
(1) Can directly to sell (2) Can use hydraulic baling press do produce piece of easy transportation and storage |
|
4 |
Oil gas |
(1) Can pass gas spray gun used as fuel (2) Excess gas can be storage system storage |
Note:
Some times ,different materials can use the same machine, mainly the cracking process is a little bit different,
Our technician will be sent to guide your operation,installation and commissioning for free.
We can test the oil yield rate for if you send us the raw materials you need to process.
Technical Parameter
|
Item |
Details |
|||
|
Model |
ODFLY-1 |
ODFLY-5 |
ODFLY-10 |
ODFLY-15 |
|
Daily Capacity |
1T |
5T |
10T |
15T |
|
Operation mode |
Batch |
|||
|
Raw Materials |
Waste Plastic, Tyre, Rubber, Oil Sludge |
|||
|
Reactor Size |
D1.4*L2.0m |
D2.0*L5.0m |
D2.6*L6.6m |
D2.8*L8m |
|
Pattern |
Horizontal & Rotary |
|||
|
Heating Materials |
Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc. |
|||
|
Total Power |
10kw/h |
18kw/h |
25kw/h |
30kw/h |
|
Floor Area (L*W*H) |
10*5*6m |
20*7*8m |
25*8*8m |
30*10*9m |
|
Operating Pressure |
Normal Pressure |
|||
|
Cooling Method |
Water Cooling |
|||
|
Life span |
5-8 Years |
|||
Success Case

We have over 300 running production line in the world market: India, Malaysia, Philippines, Indonesia, Thailand, Vietnam, Pakistan, South Africa, Jordan, Turkey, Poland, Russia, Canada,South Korea, Peru, Colombia...
Transport

We will provide the most reliable, safest mode of transportation, in order to make machine arrived destination timely.Installation and training-our company will send one technician for each set of machine for guiding your installation, testing the machine and training your workers.
Our Services
1. Design the installation drawings according to your site
2. 1 year warranty, engineers available to service at any time.
3. Periodical call visit, to make sure there is no problems of the equipment.
4. Design specific maintainence program according to different situation of your plant.
5. For each set of waste plastic pyrolysis oil refining system, one technician will be sent to guide your installation, test the machine and train your workers.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co.Ltd id founded in 2004, which is a specialized enterprise dedicated to R & D and production of the tire recycling plant, waste tire cracking machine, waste plastic recycling machine, Continuous Plastic Recycling Machine, Waste Plastic Recycling Plant,distillation plant, waste engine oil refining plant, tire crusher, plastic crusher, tire cutter machine, rubber powder plant, tyre shredder machine, plastic shredder, diesel burner, heavy oil burner, Bucket elevator, vertical vibrating feeder, belt conveyor, scraper conveyor, screw conveyor, chain conveyor, etc.. our company by eputation first, service first, customer first is an objective and take integrity as life. All for customer's satisfaction efforts, all for the company's long term healthy development efforts. We solemnly promise that we will depelope us with good quality and credible after sale service! We sincerely welcome you to our company and give us suggestions and directions!!!

If you are interesting in waste plastic recycling machine, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: waste plastic recycling machine, China waste plastic recycling machine manufacturers, suppliers, factory










