Material Cooling Elevator

 

It is composed of base, feeding tray, support pipe, center pipe and spiral conveying trough welded on the center pipe. The conveying trough is usually stainless steel, carbon steel or other special materials. The drive system is a resonance system designed in a special form, and the eccentricity of the motor The force is steplessly adjustable (vibration frequency, vibration amplitude, vibration angle). The motor is installed on the base at the top or bottom. The new base form and double-pipe design effectively improve the conveying height and conveying output. The vibrating body and the top or base of the vibrating machine are permanently connected with a flange, which is more secure. The support part is composed of high-elasticity rubber springs, which effectively alleviates the destructive force brought by the vibration to the fuselage.

Spiral vertical vibration hoist is widely used in the lifting of massive, powdery and short fibrous solid materials in mining, metallurgy, machinery, building materials, chemical industry, rubber, medicine, electric power, grain, food and other industries. It can greatly reduce the collision damage to materials. The down vibrating vibration hoist is to install the vibration motor at the lower end of the hoist. Its advantages are that the lifting height can be higher (up to more than 8m), the conveying capacity is larger and the structure is more stable.

 

 

1. The vertical machine works smoothly, with high conveying efficiency, and is not affected by high conveying speed.

2. Only pieces of goods can be transported, and the materials have smaller sizes.

3. Cannot transport objects that are too large

4. It is used in conjunction with the entrance and exit conveying equipment, so that the conveying can be fully automated, avoiding the inconvenience caused by manual operation.

5. Compact structure and small area.

6. Safe and reliable, easy to operate, low operating cost and effective delivery cost.

 

 

The motor vibration vertical hoist is composed of a lifting tank, a vibration motor, a vibration reduction system and a base.

 

 

 

Model	Conveying Capacity (T/H)	Trough Diameter (Mm)	Conveying Width (Mm)	Conveying Height (M)	Vibration Times (Min)	Double Amplitude(Mm)	Motor Power (Kw)	Weight(Kg)
DZC300	~1.0	3-8	77	≤2.2	960	6~7	2x0.4	680
DZC500	~2.0	6-15	140	≤3.0		6~8	2x0.75	1010
DZC550	~3.0	10-25	152	≤3.5		6~8	2x1.5	1190
DZC600	~3.0	25-35	163	≤4.0		6~7	2x1.5	1321
DZC800	~4.0	19-40	224	≤4.5		6~8	2x2.2	1590
DZC850	~4.0	35-50	224	≤5.0		6~9	2x2.2	1750
DZC900	~3.5	42-60	185	≤6.0		6~9	2x3.0	2100

 

 

Chemical industry: resin, paint, medicine, medicine, cosmetics, fire extinguishing agent, plastic powder, abrasive glass, etc.

Ceramic industry: abrasives, alumina, porcelain mud, clay mud, glass powder, refractory materials, quartz sand, PVC resin Powder, citric acid, polyethylene powder, washing powder, etc.

Food industry: sugar, monosodium glutamate powder, salt, fruit juice, starch, milk powder, food, soy milk, egg powder, rice noodles, soy sauce, fish Powder, pineapple juice, etc.

Metallurgical industry: carbon black, cosolvents, activated carbon, pearls, etc.

 

 

 

Any equipment may have problems during operation, so will Material cooling elevators also have problems?

Zhengzhou Odifei Machinery Equipment Co., Ltd. Material cooling elevator manufacturers will introduce you to seven problems and solutions about Material cooling elevators.

 

 

1. The motor must run in reverse.

2. The motor should be protected against phase loss.

3. When driving, all obstacles should have a certain gap with the device itself or use a soft connection.

4. The motor needs to be refueled regularly (2# lithium base).

5. During use, you should pay attention to whether the shock-absorbing spring is damaged. If any damage is found, it should be replaced in time.

6. The feeding must be continuous, and the material should be controlled to a certain extent. It is not advisable to add too much material each time, otherwise the overflow phenomenon will occur in the tank.

The overall size design of the vertical vibration screw elevator depends on the conveying volume of the conveyed material, product properties, temperature requirements related to the process, conveying height requirements and space constraints and operating conditions, etc. The design of feeding and discharging is based on the site The conditions are in the form of feed trays, feed chute and feed plate.

 

 

Dzc series vertical hoists are divided into five types: basic type, closed type, cooling type, up vibration type and dry type.

 

 

1. Upper vibration vibration hoist : placing the exciter part on the top of the lifting machine can effectively reduce the height of the feed inlet from the ground, but it has greater requirements on the strength of the machine body. The upper vibration type elevator with the same model and height consumes more materials than the lower vibration type.

2. Down-vibration vertical hoist : the vibration exciter of the foundation elevator is located at the bottom of the equipment, the spiral conveying groove is open, and the materials are transported upward from the feeding port to the top discharging port for discharging.

3-4. Cooling vertical vibration hoist : the cooling structure is added to the basic type of elevator, and the mode of air cooling, water cooling or double cooling is determined according to the actual situation of users. The whole process is more complex and needs the strong foundation of the elevator body.

5. Fully enclosed vertical vibration hoist : as the name suggests, the closed type elevator partially closes the open spiral conveying groove. It is suitable for some manufacturers with high requirements for sealing, but it is not suitable for cooling conveying.

6. 360 degree feeding vertical elevator : The feeding tray is large and can be fed in 360 degrees. Suitable for multi-angle feeding.

7. Drying type: hot air drying is mainly used for drying, which still has an obvious effect on the removal of moisture on the material surface.

 

 

 

 

Pre-Sale Service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale Service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, Material cooling elevator, slat feeder, chain plate conveyor, slat conveyor, scraper conveyor, large angle belt conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 belt conveyor (or belt conveyor), mobile conveyor, belt conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;

In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.

Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!

 

 

Q: Are you a factory or a trading company? When building a Material cooling elevator , can it be used to cool materials?

A: We are a factory, established in 2007, specializing in the manufacture of vertical vibration hoists, vertical vibration elevator, bucket elevators, belt conveyors, scale conveyors, screw conveyors, etc. This vertical vibrating hoist can cool down the material while lifting.

 

Q: How about spare parts?

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

Q: Will you test the vertical vibration elevator before delivery?

A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

Q: What is the reason if the material does not go up during the debugging process?

A: Check whether the screw of the motor eccentric block is loose.

 

Q: What is the reason for the overflow phenomenon?

A: Check whether the feeding is uniform or whether there is a phenomenon of jamming.

 

Q: What is the reason for the failure to produce output?

A: It is necessary to adjust the included angle of the eccentric block of the motor.

 

Q: What is the reason for the abnormal sound?

A: Check the wear degree of the rubber spring.

 

 

 

1. The motor must run in reverse

2. The motor should be protected against phase loss

3. The motor needs to be refueled regularly

4. The feeding must be continuous, and the material should be controlled to a certain extent. It is not advisable to add too much material each time, otherwise the overflow phenomenon will occur when the tank is full.

5. In the process of use, attention should be paid to whether the shock-absorbing spring is damaged. If it is damaged, it should be replaced in time.

 

 

 

 

Buyers need to provide the following parameters:

Material name, specific gravity, lifting amount/hour, lifting height, material, are there any other special characteristics?

When purchasing an air-cooled spiral vibration hoist, Manufacturer's suggestion:

Users should provide some parameters when ordering an air-cooled spiral vibration vertical hoist:

1. The original temperature of the material conveyed by the air-cooled spiral vibration vertical elevator

2. The processing temperature of the material conveyed by the air-cooled spiral vibration vertical elevator

3. Does the material lifted by the air-cooled spiral vibrating vertical elevator have the characteristics of stickiness and easy connection?

4. The height of the air-cooled spiral vibration vertical elevator and the output per hour

5. The height and position of the discharge port of the equipment to be matched with the air-cooled spiral vibration vertical hoist

 

 

If you are interesting in Material cooling elevator, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: material cooling elevator, China material cooling elevator manufacturers, suppliers, factory