Heat Dissipation Vertical Vibration Elevator

 

Dzc series motor vibration vertical hoist is composed of lifting slot, vibration motor, damping system and base. This series of hoists uses the vibration motor as the vibration source. The center lines of two vibration motors of the same model fixed on the lifting groove are installed at a certain angle and rotate synchronously in the opposite direction. The component of the centrifugal force generated by the eccentric block of the vibration motor at each instantaneous position during rotation moves back and forth along the throwing direction, so that the whole body supported on the shock absorber vibrates continuously, Make the material move upward while being thrown up in the lifting groove. After the material falls into the feeding groove, it begins to be thrown up. At this time, the material can be in full contact with the air and play the role of heat dissipation and cooling. The elevator can transport powder, block and short fiber solid materials (except those with viscosity and easy caking) vertically, and can also complete the drying and cooling of materials.

 

 

1. The product occupies a small area, which is convenient for process layout design.

2. Materials can be transported upwards or downwards.

3. Low noise, simple structure, convenient installation and maintenance.

4. The structure is simple and reasonable, the energy consumption is small, the electric energy is saved, and the wear of the trough is small.

 

 

The motor vibration vertical hoist is composed of a lifting tank, a vibration motor, a vibration reduction system and a base.

 

 

 

Model	Conveying Capacity (T/H)	Trough Diameter (Mm)	Conveying Width (Mm)	Conveying Height (M)	Vibration Times (Min)	Double Amplitude(Mm)	Motor Power (Kw)	Weight(Kg)
DZC300	~1.0	3-8	77	≤2.2	960	6~7	2x0.4	680
DZC500	~2.0	6-15	140	≤3.0		6~8	2x0.75	1010
DZC550	~3.0	10-25	152	≤3.5		6~8	2x1.5	1190
DZC600	~3.0	25-35	163	≤4.0		6~7	2x1.5	1321
DZC800	~4.0	19-40	224	≤4.5		6~8	2x2.2	1590
DZC850	~4.0	35-50	224	≤5.0		6~9	2x2.2	1750
DZC900	~3.5	42-60	185	≤6.0		6~9	2x3.0	2100

 

 

Chemical industry: resin, paint, medicine, medicine, cosmetics, fire extinguishing agent, plastic powder, abrasive glass, etc.

Ceramic industry: abrasives, alumina, porcelain mud, clay mud, glass powder, refractory materials, quartz sand, PVC resin Powder, citric acid, polyethylene powder, washing powder, etc.

Food industry: sugar, monosodium glutamate powder, salt, fruit juice, starch, milk powder, food, soy milk, egg powder, rice noodles, soy sauce, fish Powder, pineapple juice, etc.

Metallurgical industry: carbon black, cosolvents, activated carbon, pearls, etc.

 

 

 

Any equipment may have problems during operation, so will Heat dissipation vertical vibration elevators also have problems?

Zhengzhou Odifei Machinery Equipment Co., Ltd. Heat dissipation vertical vibration elevator manufacturers will introduce you to seven problems and solutions about Heat dissipation vertical vibration elevators:

 

 

 

1. Foundation: the vibration exciter of the foundation elevator is located at the bottom of the equipment, the spiral conveying groove is open, and the materials are transported upward from the feeding port to the top discharging port for discharging.

2. Closed type: as the name suggests, the closed type elevator partially closes the open spiral conveying groove. It is suitable for some manufacturers with high requirements for sealing, but it is not suitable for cooling conveying.

3. Cooling type: the cooling structure is added to the basic type of elevator, and the mode of air cooling, water cooling or double cooling is determined according to the actual situation of users. The whole process is more complex and needs the strong foundation of the elevator body.

4. Upper vibration type: placing the exciter part on the top of the lifting machine can effectively reduce the height of the feed inlet from the ground, but it has greater requirements on the strength of the machine body. The upper vibration type elevator with the same model and height consumes more materials than the lower vibration type.

5. Drying type: hot air drying is mainly used for drying, which still has an obvious effect on the removal of moisture on the material surface.

 

 

Pre-Sale Service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale Service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, scraper conveyor, large angle belt conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 belt conveyor (or belt conveyor), mobile conveyor, belt conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;

In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.

Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!

 

 

Q: Are you a factory or a trading company? When building a heat dissipation vertical vibrating elevator, can it be used to cool materials?

A: We are a factory, established in 2007, specializing in the manufacture of vertical vibration hoists, vertical vibration elevator, bucket elevators, belt conveyors, scale conveyors, screw conveyors, etc. This vertical vibrating hoist can cool down the material while lifting.

 

Q: How about spare parts?

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

Q: Will you test the vertical vibration elevator before delivery?

A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

Q: What is the reason if the material does not go up during the debugging process?

A: Check whether the screw of the motor eccentric block is loose

 

Q: What is the reason for the overflow phenomenon?

A: Check whether the feeding is uniform or whether there is a phenomenon of jamming.

 

Q: What is the reason for the failure to produce output?

A: It is necessary to adjust the included angle of the eccentric block of the motor.

 

Q: What is the reason for the abnormal sound?

A: Check the wear degree of the rubber spring.

 

 

 

1. The motor must run in reverse

2. The motor should be protected against phase loss

3. The motor needs to be refueled regularly

4. The feeding must be continuous, and the material should be controlled to a certain extent. It is not advisable to add too much material each time, otherwise the overflow phenomenon will occur when the tank is full.

5. In the process of use, attention should be paid to whether the shock-absorbing spring is damaged. If it is damaged, it should be replaced in time.

 

 

 

 

Buyers need to provide the following parameters:

Material name, specific gravity, lifting amount/hour, lifting height, material, are there any other special characteristics?

When purchasing an air-cooled spiral vibration hoist, Manufacturer's suggestion:

Users should provide some parameters when ordering an air-cooled spiral vibration vertical hoist:

1. The original temperature of the material conveyed by the air-cooled spiral vibration vertical elevator

2. The processing temperature of the material conveyed by the air-cooled spiral vibration vertical elevator

3. Does the material lifted by the air-cooled spiral vibrating vertical elevator have the characteristics of stickiness and easy connection?

4. The height of the air-cooled spiral vibration vertical elevator and the output per hour

5. The height and position of the discharge port of the equipment to be matched with the air-cooled spiral vibration vertical hoist

 

 

If you are interesting in Heat dissipation vertical vibration elevator, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: heat dissipation vertical vibration elevator, China heat dissipation vertical vibration elevator manufacturers, suppliers, factory