Construction Sand Board Chain Bucket Elevator

 

The bucket elevator hopper scoops up the material from the silo below, lifts it to the top with the conveyor belt or chain, bypasses the top wheel and then turns down, and the bucket elevator dumps the material into the receiving tank. The drive belt of the belt-driven bucket elevator generally adopts a rubber belt, which is installed on the lower or upper driving drum and the upper and lower redirecting drums. The chain-driven bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the top or bottom, and a pair of redirecting sprockets on the bottom or top. Bucket elevators are generally equipped with casings to prevent dust from flying in the bucket elevator.

 

 

NE plate chain bucket elevator lifting materials: limestone, gypsum, lump coal, slag, ore, cement clinker, putty powder, powder particles, corn particles, etc.

 

 

(1) The driving power of the bucket elevator is small, and the equipment adopts the inflow feeding, inductive discharging, and large-capacity hopper intensive arrangement. When the material is lifted, there is basically no material return and digging phenomenon. Therefore, its transmission efficiency is relatively high.

(2) The lifting range is relatively wide. This type of hoist has less requirements on the types and characteristics of materials. It can not only improve general powdery and small granular materials, but also improve the sealing performance of materials with greater abrasiveness. It is better for the environment less pollution.

(3) The operation of the bucket elevator is relatively reliable, and it has relatively advanced design principles and processing methods, which is also the premise to ensure that the equipment can maintain long-term stable operation.

(4) The service life is long, and the feeding of the hoist adopts the inflow type, and there is little extrusion and collision between the materials without the use of buckets.

 

 

Specifications	Conveying capacity(m³/h)	particle size(mm)	Bulk density of material(t/m³)	maximum lift height(m)	power(kw)
NE15	10～15	40	0.6～2.0	35	1.5～4
NE30	18.5～31	55	0.6～2.0	50	4～11
NE50	35～60	60	0.6～2.0	45	4～18.5
NE100	75～110	70	0.6～2.0	45	5.5～30
NE150	112～165	90	0.6～2.0	45	5.5～45
NE200	170～220	100	0.6～1.8	40	7.5～55
NE300	230～340	125	0.6～1.8	40	11～75
NE400	340～450	130	0.6～1.8	30	18.5～90
NE500	450～550	140	0.6～1.8	30	30～110
NE600	550～660	150	0.6～1.8	30	37-132
NE800	680～830	165	0.6～1.8	30	130～160

 

 

NE type plate chain bucket elevator is composed of running parts, driving device, upper device, middle casing and lower device.

Running parts---consists of hopper and special plate chain, NE30 and lower use single-row chain, NE50--NE800 use double-row chain.

Driving device---using a variety of driving combinations to drive, (according to the actual needs of the user). The driving platform is equipped with a maintenance frame and a railing. The drive system is divided into two types: left and right.

The upper device---is installed with track (double-row chain), backstop, and the discharge port is equipped with an anti-return rubber plate.

Middle section---Part of the middle section is equipped with track (double chain) to prevent the chain from swinging during operation.

Lower device---installed with automatic tensioning device.

1.Driving device 2.Discharge port 3.Upper section 4.Traction member 5.Hoppers6.Center casing 7.Lower section8.Tensioning device 9.Feed port 10.Inspection Gate

 

 

Chemical industry: resin, paint, medicine, medicine, cosmetics, fire extinguishing agent, plastic powder, abrasive glass, etc.

Ceramic industry: abrasives, alumina, porcelain mud, clay mud, glass powder, refractory materials, quartz sand, PVC resin Powder, citric acid, polyethylene powder, washing powder, etc.

Food industry: sugar, monosodium glutamate powder, salt, fruit juice, starch, milk powder, food, soy milk, egg powder, rice noodles, soy sauce, fish Powder, pineapple juice, etc.

Metallurgical industry: carbon black, cosolvents, activated carbon, pearls, etc.

 

 

 

1. Use

(1) The hoist should be started with no load, and pay attention to the abnormal sound;

(2) After 2-5 minutes of no-load operation, start feeding continuously and evenly to the feeding port of the elevator, but the conveying volume cannot exceed the design requirements;

(3) After 100-200 hours of production, all fasteners of the hoist must be checked, especially the condition of the nut, and the lubrication condition must be checked at the same time;

(4) During the operation of the hoist. Various adjustments are not allowed;

(5) All inspection doors should be closed during operation, and lighting devices should be installed near frequently used inspection doors;

(6) The working conditions of the head and tail should be checked frequently during use;

(7) Stop the machine after all the materials in the hopper are unloaded.

 

2. Maintenance

(1) Clean up the residual material at the tail before starting the machine;

(2) According to their own situation, users should have at least one comprehensive inspection every year to ensure normal production;

(3) The electrical equipment (including electric control cabinet and material level indicator) must be checked regularly, at least once every 720 hours of production;

(4) The lubricating oil is carried out according to the table below;

(5) When the lowest point of the current bearing slip is close to the red line of the slide rail, immediately check whether the plate chain has reached the extension limit and deal with it in time;

 

Buyer Notice

According to different material characteristics, it is necessary to select the model first, and then calculate the price.

Before selecting a bucket elevator, you need to provide: material name, specific gravity, hoisting capacity/hour, lifting height, are there any other special features?

 

 

Pre-Sale Service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
• We can design and manufacture products according to the special needs of customers to meet the different needs of investors

 

On Sale Service:

• Strict inspection of products before leaving the factory
• Ships according to contract

 

After-sale Service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, scraper conveyor, large angle belt conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 belt conveyor (or belt conveyor), mobile conveyor, belt conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;

In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.

Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!

 

 

Q: Are you a factory or a trading company? When building a Construction Sand Board Chain Bucket Elevator, What other materials are bucket elevators suitable for?

A: We are a factory, established in 2007, specializing in the manufacture of vertical vibration hoists, vertical vibration elevator, bucket elevators, belt conveyors, scale conveyors, screw conveyors, etc. Bucket elevator can be used in chemical industry, ceramic industry, food industry, metallurgical industry, etc..

 

Q: How about spare parts?

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

Q: Will you test the Crushed ore plate chain bucket elevator before delivery?

A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

Q: What is the reason for reverse feeding of bucket elevator during operation?

A: If the feeding is excessive or uneven, control the feeding.

 

Q: What is the difference between NE bucket elevator, ring chain elevator and belt elevator, and how to select them?

A: Generally, the three can be used in general. The material lifted by the belt elevator cannot be too high. NE elevator has large lifting capacity.

 

Q: How to check and solve the strong swing of bucket elevator?

A: Checking the bolts and tightening the chain will help solve this problem.

 

Q: How to install bucket elevator?

A: The installation of conventional equipment can be guided remotely, and the production line or customized equipment can be arranged with technicians to guide the installation and debugging on site.

 

 

 

1. Pay attention to the operation of the hopper, traction chain and sprocket. The running part must not collide with other fixed parts or get stuck. The two chains should run in the same way, and the hopper is not allowed to be skewed.

2. Whether the oil temperature of each bearing is normal, (after 2 hours of operation, the temperature should not be greater than 60°) whether the lubrication and sealing are good.

3. Whether the accelerator has excessive noise, whether there is oil leakage, whether the coupling is reliable, and whether the electrical control is normal. No-load power should not exceed 35% of rated power.

4. Carefully observe the backstop device to see if it is reliably disengaged and engaged during operation.

5. Whether all the fasteners are loose, pay special attention to the tightening of the fixing bolts between the hopper and the chain after parking.

After the no-load test machine is completed and deemed satisfactory, a 16-hour load test machine should be carried out, that is, the operation should be carried out under the conditions of the original designed lifting amount and lifting materials.

 

 

 

 

Buyers need to provide the following parameters:

Material name, specific gravity, lifting amount/hour, lifting height, material, are there any other special characteristics?

If you are interesting in Construction Sand Board Chain Bucket Elevator, please feel free contact us in 24 hours!

Welcome you visiting our factory!!!

 

Hot Tags: construction sand board chain bucket elevator, China construction sand board chain bucket elevator manufacturers, suppliers, factory