Working principle of Heavy Chain Conveyor
The trough plate of the Heavy Chain Conveyor adopts double arc plates, which can effectively prevent material leakage. The traction chain adopts a separate structure for load-bearing and traction, which improves the impact load capacity of the plate feeder. The tail tensioning device is equipped with a disc spring, which can slow down the impact load of the chain and improve the service life of the chain. There are sleepers at the tail to absorb shock, and a special shock-absorbing idler support in the middle, which improves the force condition of the rollers and groove plates on both sides of the impact of large pieces of material, and improves the life of running parts. The specially reinforced head is placed on the bottom and the left and right are separable, which does not prevent the rotor body of the crusher from being lifted. The head is equipped with a sprocket of 13-15 teeth, and the odd and even teeth are separated for transmission, and the service life is increased. The sprocket of the head device is cut into 3 teeth, and the teeth can be replaced without removing the chain plate, which is easy to maintain.

Features
1. Adopt scaly conveying, strong bending resistance and impact resistance.
2. The equipment is relatively stable during operation, the noise generated is low, and there will be no noise pollution to the surrounding environment.
3. Due to the use of special process materials, the equipment is suitable for the transportation of materials with large specific gravity in large and medium-sized production lines, with strong resistance and large transportation capacity.
4. The range of conveying materials is wide, whether it is materials with sharp edges and corners, materials with strong abrasiveness, or even high-temperature materials, it can be used.
5. The conveying distance is long, and the longer distance can be as long as about 15 meters.
6. There are no special requirements for the working environment, it can be competent in all harsh working environments, and has strong versatility. It is used in metallurgy, chemical industry, electric power, coal and other industries.
Technical Parameters
|
Conveyor type |
Width mm |
Conveying speed m/s |
side panel height mm |
Conveyor chain pitch mm |
Delivery volume m³/h |
|
Lightweight slat conveyor |
400 |
0.05--1.60 |
160-250 |
200 |
450 |
|
500 |
160-315 |
700 |
|||
|
630 |
200-400 |
1150 |
|||
|
800 |
250-500 |
250 |
1850 |
||
|
Medium-sized slat conveyor |
800 |
0.05-1.0 |
160-400 |
250 |
900 |
|
1000 |
200-500 |
1400 |
|||
|
1200 |
250-500 |
315 |
1750 |
The Structure

The Heavy Chain Conveyor is composed of head wheel device, scale plate chain device, tail wheel tensioning device, guide material protection device, frame and driving device.
1. Driving device: since the speed of the apron Pan Conveyor is generally not greater than 0.5m/s, the driving device of the apron Pan Conveyor mostly adopts the transmission structure such as motor and reducer, so it can be directly connected with the head wheel shaft through the cross slider coupling, which simplifies the structure of the head wheel device, makes it easy to manufacture, install and adjust, and has a low cost. It is a single driving device with a single speed.
2. Tail wheel tensioning device: the device adopts a screw tensioning device, which is composed of a tail wheel shaft, two tail sprockets, a pair of tensioning screws and other accessories. The tension sprocket (including the hub) is supported on the sprocket shaft through double rolling bearings, which can reduce the resistance coefficient when the traction chain bypasses the sprocket; At the same time, when the chains are not synchronized due to the unequal cumulative errors of the pitch of multiple traction chains, the positions of sprocket teeth and traction chain joints can be automatically adjusted to ensure the correct engagement of sprocket teeth and traction chains, so as to avoid uneven or even uneven tension of multiple traction materials, thus improving the overall performance of the traction chain.
3. Scale plate chain device: the chain used by BL Heavy Chain Conveyor is a piece chain and stamping chain with rollers installed at the shaft end. The rollers are installed outside the outer chain plate. The rollers only support the load on the base plate. Its structural size is relatively small, so the resistance coefficient is small, reducing the driving device and traction load. After quenching and tempering heat treatment, the chain has large bearing capacity and strong tensile strength; The chain plate joint sleeve is made of alloy steel, carburized, Quenched and ground, with high wear resistance; Scale plate hopper: the scale plate hopper is the bearing component of the Heavy Chain Conveyor. It is formed by stamping with a die with thick steel plate. It has high shape and size accuracy and small cumulative error. The scale plate will not run off.
4. Rack: the rack adopts standardized production, which not only standardizes the production process, but also avoids the errors caused by manual errors, improves the excellent rate of products, saves costs and improves economic benefits.
Which industries or materials are Heavy Chain Conveyor suitable for?
Coal powder, crushed coal, soot, carbon black, ammonium bicarbonate, pyrite powder, ammonium chloride, copper concentrate powder, alumina powder, gypsum powder, limestone powder, soda powder, urea, activated carbon, sodium oxide, silicon Calcium acid, asbestos powder, synthetic resin, rubber powder, calcium carbide, pottery ten, synthetic fertilizer, powdered pesticide, calcium sulfate, thiamine, soda ash, powdered medicine, wheat, soybean, rice, sugar, starch, crushed charcoal, wood chips , sawdust, polyvinyl alcohol synthetic detergent, fly ash phosphate fertilizer, etc.
Materials that Heavy Chain Conveyors are not suitable for conveying:
High temperature, toxic, flammable and explosive, highly abrasive, highly corrosive, highly adhesive, highly suspending, highly fluid, hard and brittle Materials that do not want to be broken.

When choosing a slat conveyor, please note the following:
1. The slat conveyor considers its own production conditions. The applications of slat conveyors in different industries are different. For large electromechanical industries such as automobiles and home appliances, heavy-duty Heavy Chain Conveyors should be selected, and industries such as food and electronics should choose light chain conveyors.
2. The slat conveyor determines the conveying material requirements. The chain plate of the Heavy Chain Conveyor is made of polypropylene, polyethylene, acetal, nylon, stainless steel, etc.; the frame of the Heavy Chain Conveyor is composed of stainless steel, high-strength aluminum alloy, carbon steel plate bending, carbon steel channel, etc., according to Choose the appropriate sheet material for the characteristics of the material you are transporting.
3. The slat conveyor determines the conveying direction. According to the different conveying directions, the Heavy Chain Conveyor is divided into linear phosphorus plate conveyor line, climbing phosphorus plate conveyor, turning chain plate conveyor, vertical phosphorus plate conveyor, curved phosphorus plate conveyor, accumulating phosphorus plate conveyor, etc. . Select the conveying direction according to the space characteristics of the site.
4. Determine the basic parameters of the slat conveyor. The width, height, spacing, length, conveying speed and carrying capacity of the conveyor can be set according to the needs of the producer.
Types of apron conveyors:
Heavy apron conveyor: suitable for short distance transportation of block materials with feeding particle size below 1000mm.
Medium apron conveyor: suitable for short-distance conveying of block materials with feeding particle size less than 400mm, transporting materials with loose density less than 2400kg/m³, block weight less than 500kg and temperature less than 400 ℃.
Light apron conveyor: suitable for short-distance conveying of block materials with feeding particle size less than 160mm, transporting materials with loose density less than 1200kg/m³, block weight less than 140kg and temperature less than 350 ℃.
Various Types

Instructions for product selection
(1) Common width of scale conveyor: b=650mm, 800mm, 1000mm, 1200mm, 1500mm, 2000mm; Among them, b=800mm, 1000mm and 1500mm are widely used;
(2) Weight of single object transported: generally 75kg, * up to 120-150kg;
(3) Conveyor length: generally 60-120m, * up to 200m;
(4) Conveyor Express Series: v=0.8, 0.96, 1.2, 1.5, 1.8, 2.4, 3.0m/min;
(5) Lifting height of conveyor: h=2.2-4.5m, * up to 10m;
(6) For various materials, the allowable inclination angle of the conveyor is 25 degrees;
(7) When the conveyor is installed on the workshop ground or open ground, the clearance height from the chord top of the return side scale plate to the ground shall not be less than 200mm; When installed in the pit, the clearance height shall not be less than 300mm. Under certain circumstances and limited by certain external conditions, the clearance height can be determined as required.
Operation instructions
1. Before commissioning, carefully check whether all fasteners are firm, and the adjusting device between chain plates shall be flexible and reliable.
2. Manually rotate the motor for several weeks, which should be able to rotate freely.
3. When starting the Heavy Chain Conveyor, check whether each roller can rotate, and only when the vibration is within the allowable range and there is no abnormal sound can it operate.
4. After no-load operation for 30 minutes, the temperature of each bearing shall not exceed 60 ℃. The chain running head on both sides has relatively balanced tension.
conveying plate type
|
|
|
Lubrication grease table components
|
Lubrication point location |
Lubricant name |
Lubrication cycle |
|
Head and tail shaft bearings |
ZG-3 calcium base grease |
once a month |
|
Screw tensioner guide rail |
Screw ZG-3 calcium base grease |
once a month |
|
Sleeve Roller Chain |
ZG-3 calcium base grease |
once every 10 days |
|
electric motor |
Care according to manufacturer's instructions |
|
|
Drag chain rollers |
ZG-3 calcium base grease |
once every 15 days |
Fault And Maintenance
|
Possible Failures |
Main Reason |
Elimination Method |
|
The motor load is too large |
Large block stuck, the coupling is not concentric |
Reduce the feeding amount, clean up large pieces, adjust the coaxiality |
|
Conveyor chain deviation |
Head and tail sprockets are not parallel |
Adjust the screw of the tail device |
|
Mesh failure of gears |
pinion wear |
Replace the drive gear |
|
Bearing temperature is too high |
Lack of lubricating oil, dirt in the oil, improper adjustment, bearing tightness, etc. |
1. Refuel and clean the bearing 2. Adjustment or Repair |
Our Guarantees And Services
Pre-Sale Service:
- Guide customers to choose the appropriate equipment model.
- Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
- We can design and manufacture products according to the special needs of customers to meet the different needs of investors
On Sale Service:
- Strict inspection of products before leaving the factory
- Ships according to contract
After-sale Service:
- The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
- If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
- After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, Heavy Chain Conveyor, large angle Heavy Chain Conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 Heavy Chain Conveyor (or Heavy Chain Conveyor), mobile conveyor, Heavy Chain Conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;
In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.
Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!
FAQ
Q: Are you a factory or a trading company?
A: We are a factory, established in 2007, specializing in the manufacture of spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, Heavy Chain Conveyor, large angle Heavy Chain Conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, and so on.
Q: How about spare parts?
A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.
Q: Will you test the machine before delivery?
A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.
Q: Can this Heavy Chain Conveyor be resistant to high temperature?
A: Yes, materials with a high temperature of less than 1000 degrees can be transported. Please contact the customer to explain the material characteristics, conveying volume and conveying length, etc. Thanks.
Q: Can a Heavy Chain Conveyor be used in a steel casting plant?
A : Yes, the Heavy Chain Conveyor is an ideal equipment for conveying sharp, hot, bulky and corrosive materials in industries such as iron and steel, mining, building materials, metallurgy, coal, chemical industry, etc.

Procurement Process

Purchase Notice
1. Please provide material name, specific gravity, particle size, etc
2. Are there other characteristics: such as viscosity, temperature, corrosivity, etc?
3. Conveying length, horizontal conveying or inclined conveying?
4. Conveying capacity / hour
If you are interesting in Heavy Chain Conveyor, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: heavy chain conveyor, China heavy chain conveyor manufacturers, suppliers, factory













