Waste Fuel Oil Burner

Waste Fuel Oil Burner

The Waste Fuel Oil Burner adopts advanced air medium atomization technology. The fuel atomization is fine, the combustion is full, the exhaust emissions are environmentally friendly, smokeless, and tasteless, and the fuel adaptability is strong. Whether it is light oil, heavy oil, or waste oil, it can be fully burned, and the flame temperature is higher than the traditional pressure atomization combustion opportunity. Because the high-pressure fuel supply part of the traditional pressure atomizing combustion machine is canceled, the oil circuit is operated without pressure, which greatly reduces the risk of fuel leakage. The control system adopts imported technology and operates automatically. Wind pressure monitoring, air pressure monitoring, flameout protection, automatic restart, and other protection functions make your use safer and more stable.

 

1. Good atomization, low energy consumption, and low noise

This type of burner uses high-pressure atomized fuel oil. When the oil pressure is greater than or equal to 0.9MPa, a good atomization effect can be obtained, with less energy consumption and low noise.

 

2. The oil and air are well matched, the flame is stable, the combustion efficiency is high, and there is no pollution to the environment.

The burner fully mixes the fuel oil with the combustion-supporting air to obtain good combustion conditions, and the recirculation of the swirling wind and the high-temperature flue gas burns again, greatly increasing the temperature of the flame. Complete combustion is achieved, the emission is completely qualified, and there is no pollution to the environment.

 

3. Safe and reliable automatic control

Using flame monitoring and combustion control, according to the safety requirements of use, fully automatic control of air supply, ignition, fuel injection, combustion, shutdown, restart, etc., is realized, which fully meets the process requirements of boilers, kitchen utensils, kilns, etc. When one link fails, it can automatically stop.

 

4. Compact structure and easy installation

All parts of the burner are integrated into a compact structure. Equipped with a slip-on mounting flange, it fits on the burner behind the burner head; just fix the flange to the stove. Press the power button to start operation.

Specification	Parameter	Specification	Parameter
Model	ODF-30	Air supply pressure	10(kg/h)
Scope of application	boiler drying heating	Dimensions	800*1000*960(mm)
calorific value	30 (10,000 cal/h)	weight	200KG
Types	industrial burner	flame length	0.3-2m
Rated voltage	380v	power	1.5kw

1. Applied to various boilers, such as garment factories, catering industries, etc.

2. Applied to powder spray drying production line,

3. Applied to the zinc-aluminum alloy die-casting industry

4. Applied to various thermal energy equipment, such as road construction, asphalt heating, heat conduction furnace, food oven, air conditioner heater, snow sweeper, garbage incinerator, hot air generator, and various general boilers.

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: waste fuel oil burner, China waste fuel oil burner manufacturers, suppliers, factory