Introduction Of Tire oil distillation plant
Tire oil distillation plant not only can distill the tire oil,but also it can distill plastic oil,engine oil,transformer oil ....etc.The final products is non-standard disel oil or base oil.Diesel is an alternative for oil resource. It is an eco-friendly way to dispose of waste oil.
Process flow diagram

1.Pump tire oil etc. into the refing reactor;
2.After heating to a certain temperature, the oil and gas is distilled out, and oil gas is enter the catalyst tower,cooling box ,and then cooled into oil and stored in the oil tank.
Small amount of non-condensable gas is introduced into the combustion chamber through the recycling system to heat the distillation reactor to save fuel.
3.The combustion waste gas produced by heating is treated by the purification system and release via the chimney
4.The oil in the refing reactor is refined to the state of heavy oil slurry or carbon black agglomerate and then left the refing reactor
6.Pump the oil into the refing reactor for the next production cycle
7.The whole production process is slightly negative pressure, safer and better oil quality.
Parameter
|
NO |
ITEM |
Parameter |
|
1 |
Suitable Raw Material |
tires oil,used oil, pyrolysis fuel oil, crude oil |
|
2 |
Structure |
Continuous Vertical |
|
3 |
Chamber Material |
Q245R boiled steel+SUS 310S |
|
4 |
Daily Capacity (24H) |
1tons-10 tons |
|
5 |
Condensers |
Q235B |
|
6 |
Oil Output |
20% Gasoline,65% diesel oil,10% slag,depend on the raw material details |
|
7 |
Fuels Choice |
fuel oil, gas; |
|
8 |
Power |
70KW, running power :15KW/H,depend on the capacity |
|
9 |
Cooling Method |
Cycle Water(300M3) |
|
10 |
Delivery Time |
1 month |
|
11 |
Type of Installation |
With foundation |
|
12 |
Installation Area (m) |
20m*7m*8m,depend on the different model |
|
13 |
Installation & Commissioning Time |
1month |
|
14 |
Noise dB(A) |
≤85 |
|
15 |
Operating Mode |
Continuous |
|
16 |
Sync Gas Treatment |
Fully burned as fuel |
|
17 |
Manpower |
1-3 per shift |
Feature of the tire oil distillation plant
1. Large production capacity, advanced technology, daily processing capacity can reach 1-50 tons;
2. Reasonable production layout, simple and convenient equipment maintenance;
3. Indirect heating of refining kettle, long service life, multiple safety devices are set on the equipment, and high safety performance;
4. Micro-negative pressure in the production process, high safety;
5. Adopt unique all-inclusive insulation shell design: excellent insulation effect, good energy saving effect;
6. Adopt box-type cooling pool design, good cooling effect, high oil yield, good oil quality;
7. Unique desulfurization and dust removal system: can effectively remove acidic gas and dust, meeting relevant national standards;
8. The refining process uses exclusive research and development catalysts, and the whole process does not require acid washing and alkali washing;
Mainly part of the tire oil distillation plant

Below we can customize:
1.The raw material of the machine;
2.The capacity one day;
3.The cooling style of this plant;
4.The dust removel style;
5.The structure of the refing reactor;
If you want to buy one set of the tire oil distillation,you need to tell us below questions:
1.What is the refined raw oil ?
2.How much do you want to distill used oil one day?
3.What is the environmental requirements in your local?
4.What is the final oil do you want to get?
Success case for the tire oil distillation plant
Hot Tags: tire oil distillation plant, China tire oil distillation plant manufacturers, suppliers, factory










