Working Principle Of Cement Plant Sand And Gravel Ring Chain Bucket Elevator
TH type bucket elevator working principle
The chain bucket elevator is driven by a motor. The motor is linked to the reducer to reduce the speed and transmits it to the main shaft sprocket through the coupling. The rotation of the sprocket drives the transmission belt to rotate in a circular manner. The silo lifts the material and feeds it upwards. When the hopper is transferred to the upper discharge port, the hopper is turned up and the material is introduced into the storage silo.
Advandge
1. Large conveying capacity: Compared with the same model HL, the conveying capacity is nearly doubled;
2. It is easy to replace and save costs. Due to the use of an assembled sprocket, the wheel body and the rim are connected with high-strength bolts. When the sprocket is worn to a certain extent, the bolts can be unscrewed and the rim can be removed and replaced, which is convenient for replacement. Thus reducing maintenance costs.
3. Low noise, in line with the current environmental protection requirements, the transmission device adopts ZLY type reducer, which is a new type of hard tooth surface reducer produced according to the ZBJ19004-88 standard, and the gears are refined by carburizing, quenching, grinding and other processes , has the advantages of small size, light weight, high bearing capacity, long life, high efficiency, low noise and so on.
4. The transmission device is equipped with a backstop, which can effectively prevent the occurrence of "feedback".
5. The traction part is a high-strength circular chain made of low-alloy steel. After reasonable heat treatment, it has the advantages of high tensile strength, good wear resistance and long service life.
6. TH type ring chain bucket elevator has two kinds of hoppers: ZH (medium-deep bucket) is generally suitable for conveying wet, easy-caking, and difficult-to-throw materials, such as wet sand, molding sand, fertilizer, alkali powder, etc. . SH type (deep bucket) is suitable for conveying dry, loose and easily thrown materials, such as cement, clinker, gravel, coal, etc., and its conveying capacity is also larger than that of ZH type.
Technical Parameter
|
Model |
TH315 |
TH400 |
TH500 |
TH630 |
|||||
|
Hopper form |
ZH |
SH |
ZH |
SH |
ZH |
SH |
ZH |
SH |
|
|
Conveying capacity(m3/h) |
38 |
59 |
58 |
94 |
73 |
118 |
114 |
185 |
|
|
Hopper |
Hopper capacity(L) |
3.75 |
6.0 |
5.9 |
9.5 |
9.3 |
15.0 |
14.6 |
23.6 |
|
Hopper spacing |
512 (mm) 688 (mm) |
||||||||
|
chain |
Diameter pitch of round steel |
θ18*64(mm)θ22*86(mm) |
|||||||
|
single chain breaking load |
≥320(KN)≥480(KN) |
||||||||
|
Material granularity(mm) |
35 |
40 |
50 |
60 |
|||||
Note:
1. The bucket volume in the table is the calculated bucket volume, and the conveying volume is calculated according to the filling factor of 0.6.
2. TH type bucket elevator hopper application:
Zh--Medium deep bucket: conveying wet viscous materials, such as sugar, wet fine sand, etc.
Sh--deep bucket: conveying heavy powder and small block materials, such as cement, sand, coal, etc.
Main Structure

TH type bucket elevator structure
Motor reducer 2, upper sprocket 3, bearing 4, maintenance platform 5, feeding port 6, bolt connection 7, chain 8, hopper 9, feeding port 10, screw tension 11, observation port 12, lower part Sprocket 13, bearing and bearing seat 14, middle multi-section box
There are two types of hoppers (deep buckets) for the TH type ring chain bucket elevator series:
ZH type (medium deep bucket) is generally used to transport wet, agglomerated and difficult to throw materials, such as wet sand, molding sand, fertilizer, alkali powder, etc.
SH type (deep bucket) is generally used to transport dry, loose and easy to throw materials, such as cement, gravel, coal, etc.
TH type bucket elevator hopper application (shallow bucket)
Q--Shallow round bottom hopper: convey materials that are wet, easy to agglomerate and difficult to throw, such as wet sand, wet coal, etc.
S--deep round bottom hopper: conveying dry, loose and easily thrown materials, such as cement, coal, crushed stone, etc.
Application Range
Chemical industry: resin, paint, medicine, medicine, cosmetics, fire extinguishing agent, plastic powder, abrasive glass, etc.
Ceramic industry: abrasives, alumina, porcelain mud, clay mud, glass powder, refractory materials, quartz sand, PVC resin Powder, citric acid, polyethylene powder, washing powder, etc.
Food industry: sugar, monosodium glutamate powder, salt, fruit juice, starch, milk powder, food, soy milk, egg powder, rice noodles, soy sauce, fish Powder, pineapple juice, etc.
Metallurgical industry: carbon black, cosolvents, activated carbon, pearls, etc.

Precautions
1. Before using the bucket elevator, you should run the empty car for a while to observe whether the traction parts are running normally, whether there is chain jamming, chain skipping, slippage and deviation, and whether the fasteners are loose. If the problem exists, it should be checked immediately and dealt with in a timely manner.
2. After running for several hours, the temperature of the bearing should not be higher than 60 degrees, and the lubrication and sealing performance should be kept well. The reducer has no oil leakage and no impact sound.
3. The traction parts (ie chains or tapes) should maintain a certain degree of tension. If there is slack in the traction parts, the hopper will easily hit the casing, which will cause the casing and the hopper to wear and crash prematurely.
4. You should always pay attention to whether the tightness of the two chains is the same, otherwise the hopper will be easily skewed, which will make the loading uneven, and it is easy for the chain to fall off the transmission sprocket and cause a parking accident.
5. Always check whether the conveyor belt is torn, whether the chain is worn or broken, and should be replaced immediately once these conditions are found.
6. Regularly check whether the fixation of the hopper is in good condition.
7. The backstop should be inspected regularly to ensure reliable operation and ensure that it does not reverse due to accident.
8. When installing the casing, ensure its installation accuracy to avoid the hopper colliding with the casing during operation.
9. All lubricating parts should be lubricated in strict accordance with the requirements.
10. Regularly maintain and clean the moving parts, and check the wear of chains, sprockets, transmission belts, rollers, and hoppers. The inspection should be carried out after stopping and disconnecting the power supply.
11. Always check the bucket elevator to see if there are large-diameter block hard objects or other impurities blocked in the lower section of the elevator.
12. Regularly check and adjust the tensioning device to keep the traction member with normal working tension.
Lubricating Material, Cycle And Method For Bucket Elevator (Chain Elevator)
|
Name of lubricating part |
Lubricating material |
Lubrication Cycle |
Lubrication method |
|
Bearing |
Water Resistant Grease |
200 hours |
with a lubricator |
|
Backstop |
Water Resistant Grease |
50 hours |
with a lubricator |
|
Tension Bolt |
Water Resistant Grease |
500 hours |
smear |
|
Speed reducer |
According to the specification of the equipped reducer |
6 months |
pour |
|
Electric Motor |
Water Resistant Grease |
6 months |
pour |
Our Guarantees And Services
Pre-Sale Service:
- Guide customers to choose the appropriate equipment model.
- Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.
- We can design and manufacture products according to the special needs of customers to meet the different needs of investors
On Sale Service:
- Strict inspection of products before leaving the factory
- Ships according to contract
After-sale Service:
- The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
- If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
- After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.
About Odifei Company

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, scraper conveyor, large angle belt conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 belt conveyor (or belt conveyor), mobile conveyor, belt conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;
In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.
Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!
FAQ
Q: Are you a factory or a trading company? When building a Cement plant sand and gravel ring chain bucket elevator, What other materials are bucket elevators suitable for?
A: We are a factory, established in 2007, specializing in the manufacture of vertical vibration hoists, vertical vibration elevator, bucket elevators, belt conveyors, scale conveyors, screw conveyors, etc. Bucket elevator can be used in chemical industry, ceramic industry, food industry, metallurgical industry, etc..
Q: How about spare parts?
A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.
Q: Will you test the Crushed ore plate chain bucket elevator before delivery?
A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.
Q: What is the reason for reverse feeding of bucket elevator during operation?
A: If the feeding is excessive or uneven, control the feeding.
Q: What is the difference between NE bucket elevator, ring chain elevator and belt elevator, and how to select them?
A: Generally, the three can be used in general. The material lifted by the belt elevator cannot be too high. NE elevator has large lifting capacity.
Q: How to check and solve the strong swing of bucket elevator?
A: Checking the bolts and tightening the chain will help solve this problem.
Q: How to install bucket elevator?
A: The installation of conventional equipment can be guided remotely, and the production line or customized equipment can be arranged with technicians to guide the installation and debugging on site.

Procurement Process

Purchase Requirements
Buyers need to provide the following parameters:
Material name, specific gravity, lifting amount/hour, lifting height, material, are there any other special characteristics?
If you are interesting in Cement plant sand and gravel ring chain bucket elevator, please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: cement plant ring chain bucket elevator, China cement plant ring chain bucket elevator manufacturers, suppliers, factory










