Home-Products- Conveyor Machine - Belt Conveyor-

Content

video

Electronic belt scale

The electronic belt scale is composed of a scale frame, a speed sensor, a high-precision load cell, and an electronic belt scale control and display instrument. It can continuously and dynamically measure solid materials.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Working principle of electronic belt scale

 

The electronic belt scale comprises a scale frame, a speed sensor, a high-precision load cell, and an electronic belt scale control and display instrument. It can continuously and dynamically measure solid materials.

When weighing, the load-bearing device transmits the gravity of the material on the belt to the load cell, and the load cell outputs a voltage (mV) signal proportional to the gravity of the material, which is amplified by the amplifier and sent to the analog/digital converter to become a digital quantity A., and send it to the calculator; after the material speed is input to the speed sensor, the speed sensor outputs the number of pulses B, and also sends it to the calculator; after the calculator calculates A and B, the material quantity of this measurement period is obtained. By accumulating each measurement cycle, the total amount of material passing continuously on the belt can be obtained.

 

Features

 

1. The structure is simple, the force transmission links are few, and the installation is simple and convenient.

2. Unique rectangular lever with good rigidity and no deformation;

3. Non-friction rubber trunnion support, anti-corrosion, moisture-proof, anti-vibration;

4. Resistance to lateral force and horizontal component force, effectively reducing the influence of belt deviation and blanking deviation on system accuracy

 

Structure

Electronic belt scale

Main technical parameters

Accuracy of single idler belt scale: +/-1%

Lever multi-roller belt scale accuracy: +/-0.5%

Accuracy of suspended belt scale: +/-0.125%~0.25%

Belt speed: 0~6m/s

Remote transmission: 1000m

Belt conveyor inclination: 0~30°

Working conditions and installation conditions:

Ambient temperature: Mechanical: -20℃~+50℃ Instrument: 0℃~40℃

Power supply voltage: 220V (+10﹪, -15﹪) 50Hz±2﹪

Relative humidity: about 150%

Belt Scale Selection Table

Model

Belt Width(mm)

Flow(m3/h)

Metrology Accuracy

JZBS-500

500

0.05-6

<0.5%

JZBS-650

650

0.5-10

JZBS-800

800

2-30

JZBS-1000

1000

5-100

JZBS-1200

1200

10-200

JZBS-1400

1400

30-300

JZBS-1600

1600

50-500

JZBS-1 800

1800

100-1000

Which industries or materials are belt scales suitable for?

Coal powder, crushed coal, soot, carbon black, ammonium bicarbonate, pyrite powder, ammonium chloride, copper concentrate powder, alumina powder, gypsum powder, limestone powder, soda powder, urea, activated carbon, sodium oxide, silicon Calcium acid, asbestos powder, synthetic resin, rubber powder, calcium carbide, pottery ten, synthetic fertilizer, powdered pesticide, calcium sulfate, thiamine, soda ash, powdered medicine, wheat, soybean, rice, sugar, starch, crushed charcoal, wood chips, sawdust, polyvinyl alcohol synthetic detergent, fly ash phosphate fertilizer, etc.

Safe Operation

1. The factors causing the deviation must be eliminated in time.

2. Adhere to the maintenance system to avoid man-machine accidents.

3. No-load start or stop, strictly abide by the operating procedures and sequences.

4. Keep records of equipment use and maintenance, and do a good job of handover work.

maintenance

1. Check whether there is any abnormality in the joint part of the tape, such as cuts, cracks, etc., and damage caused by other reasons.

2. Whether the upper and lower layers of the tape are worn, and whether the sidewall is worn.

3. Check whether the rubber scraper of the cleaning device is severely worn and cannot be in close contact with the tape. If so, adjust or replace the rubber scraper.

4. Keep each idler rotating flexibly, and replace the non-rotating or damaged idler.

5. Refuel all kinds of bearings regularly.

6. Repair or replace other worn parts or components.

7. Repair or replace the tape.

 

Hot Tags: electronic belt scale, China electronic belt scale manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY