What is the process flow of waste plastic refining equipment?
"White pollution" has become an increasingly prominent environmental problem. Waste plastics can be used to obtain fuel oil through refining equipment. So how does the waste plastic cracking and refining equipment complete these series of process operations?
The waste plastic cracking and refining equipment process mainly includes several links such as feeding, cracking, cooling, flue gas purification, and slag discharge;

Feeding link:
Feed into the reactor through automatic feeding machine or manual feeding. After the feeding is completed, the furnace door is closed and heated, so that the waste plastics undergo high-temperature cracking under airtight and oxygen-free conditions.
Cracking link:
Waste plastics are continuously and evenly heated and burned in the reactor, and decomposition reactions occur. When the temperature of the reactor reaches 160°, oil and gas are gradually produced, and the oil and gas are produced from the rear end outlet and begin to cool.
Cooling link:
The oil and gas first enter the gas separation bag, which reduces the flow speed of the oil and gas and also deposits a part of the carbon black. The oil vapor then enters the cooling pool and liquefies into oil.
Flue gas purification link
The exhaust gas combustion process will produce a certain amount of smoke and harmful components, which need to enter the spray dust removal device to meet emission standards and ensure that the entire high-temperature cracking process of waste plastics is carried out in an environmentally friendly environment.
Finally, after full cracking is completed, the carbon black is automatically discharged from the rear end of the reactor, greatly improving the slag discharge efficiency.
The above is the process flow of waste plastic cracking and refining equipment, which basically summarizes the operating principle of waste plastic thermal decomposition and refining equipment.

