The Refinery Waste Oil To Diese equipment can not only process waste oil or waste diesel, but also further process tire oil/plastic cracking oil. After the waste pyrolysis machine extracts pyrolysis oil from waste tires/waste plastics, if we want to make the pyrolysis oil more valuable and more widely used, we usually carry out the distillation and catalytic treatment of the pyrolysis oil, also known as waste oil recovery machine. Finally, qualified diesel or gasoline can be obtained, which can be directly used in low-speed engines, such as excavators, road rollers, loaders, etc.
It can be designed according to the actual needs of customers, and it can be designed for 1-100 tons. If you need more technical introduction, please contact Zhengzhou Odifei Machinery Equipment Co., Ltd., and someone will answer your questions 24 hours a day.
Flowing Chart
Process
1) Burn the preheater first, use the flue to heat the distillation reactor, and pass the flue gas into the preheater.
2) Then, the waste oil preheated by the preheater is injected into the distillation reactor through the oil pump, and the heated waste oil is subject to distillation and pyrolysis.
3) Then enter the fractionating tower to fractionate the high-temperature oil and gas.
4) The upper air outlet is mainly composed of light oil and gas components, which are introduced into the shell and tube condenser for cooling. The middle air outlet is composed of oil and gas components, which are introduced into another shell and tube condenser. A port is set at the top of the preheating tank, which is introduced into the third shell and tube condenser.
5) Condensate the above three kinds of oil and gas respectively. Three condensers correspond to three oil tanks.
6) The non condensable gas passes through the safety water seal, also known as the flame arrester, and then the non condensable gas enters the furnace as fuel to heat the distilling furnace. Thus, the operation cost of distillation equipment can be saved.
Main Parts List
|
Item |
Function |
|
Distilation reactor |
The waste oil will be pumped into the reactor for refining. |
|
Distillation column |
Atmospheric Fractionator Ensure differrent Fraction come Out. |
|
Condensing device |
The oil gas will be cooled to liquid oil then flow to the oil storage tank |
|
Vacuum pump |
Ensure the distillation machine working under normal pressure. |
|
Anti back fire device |
Safety device , prevent the oil gas revert to the reactor. |
|
Non condensable oil gas recycling system |
The non condensed oil gas (Syngas ) will be recycled to heating system as fuel. |
|
Color and smell removal system |
the last step to remove bad smell and color to yellow diesel oil. |
|
Dedust system |
3 layers of ceramic packing dedusting to remove dust and acidity, non- pollution. |
|
Safety devices |
Auto releasing pressure device , alarm, safety valve , etc to ensure safety operating. |
End Production
|
No. |
End Production Name |
Yield |
Usage |
|
1 |
Diesel |
73% |
* Used for Engine Fuel |
|
2 |
Gasoline |
12% |
* Used for Engine Fuel |
|
3 |
Residue Oil |
9% |
* Feeding into Pyrolysis Machine for Pyrolysis * Used as heating fuel for Distillation machine |
|
4 |
Non-Condensible Gas |
3% |
* Recycle as Heating fuel after treated by Gas-treatment System |
|
5 |
Other |
3% |
* Water and impurity 2% * Loss 1% |
FAQ
1. What kind of raw materials can Refinery Waste Oil To Diesel Plant handle?
Odifei Refinery Waste Oil To Diesel Plant can process all kinds of waste motor oil, plastic oil, tire oil, waste diesel oil, waste industrial oil,waste diesel etc.
2. Are you a factory or a trading company?
A: We are a factory with more than 17 years of experience in Refinery Waste Oil To Diesel Plant.Welcome to visit our factory. We will arrange the schedule and book hotels for you.
3. What is the final product?
The main products are diesel, a small amount of gasoline and slag.
4. What is the oil yield?
Taking waste oil as an example, the oil yield is generally 70%-95%. According to the different oil content of the raw material, the oil yield is different.
5. What are the heating methods?
It can be heated with heat transfer oil, refined diesel, natural gas, coal, wood, electricity, etc.
6. Do you need other special chemicals in the production process?
With the refining technology we developed, only our catalysts are needed, and no acid-base washing is required.
7. What do customers need to prepare?
Customers only need to prepare the oil storage tank, waste oil tank, circulating water tank and power supply.
8. Is there any technical training?
We will arrange 1-2 technicians to go to the site to guide the installation. After the installation, we will provide technical training and on-site operation to the workers.
9. How long is the warranty period?
One year warranty, if you have any questions, we will reply within 24 hours!
10. How many workers are needed to operate this machine, and are specialized technicians required?
2 workers, no need for specialized technicians.
11. Can it be customized?
Yes, according to the material characteristics, Odifei will design the best solution for you.
12. Can I visit the equipment in operation?
You are very welcome to visit China. We will take you to the customer site to see the entire operation process.
Customers Pictures
Our Company
|
Company Name |
Zhengzhou Odifei Machinery Equipment Co., Ltd. |
|
Covering Area |
30000 Square Meters |
|
Founded Year |
2007 |
|
Certification |
ISO, CE, Patents, SGS Report, ISO9000 |
|
Main Products |
Pyrolysis Machine, waste tyre pyrolysis plant, waste plastic pyrolysis plant, tyre crusher, waste oil distillation plant, pyrolysis oil to diesel machine, waste engine oil refining machine, oil burner, diesel burner, heavy oil burner |
|
Engineer Owned |
4 R&D Engineers, 19 Technical People |
|
International Market |
15% Europe, 14% Southeast Asia, 33% Chinese Mainland, 5% America, 7% Africa, 8% Middle East, 3% East Asia, 11% South Asia, 4% Central Asia, 11% South Asia |
Sales Service
Pre sales service:
1) Assist in plant site planning;
2) Assist in the overall plant operation plan;
3) Assist in the accounting of investment and income plans;
4) Show customers around the operation site;
5) Assist in applying for government permits;
After-sale service:
1) Quality inspection before delivery;
2) Hemp rope, plastic film or fumigation free wooden box packaging;
3) Assistance in container loading:
4) Installation and commissioning:
5)Technical training for workers.
If you are interesting in Refinery Waste Oil To Diesel Plant , please feel free contact us in 24 hours!
Welcome you visiting our factory!!!
Hot Tags: refinery waste oil to diesel, China refinery waste oil to diesel manufacturers, suppliers, factory
